PDA

: Gravel mode -.3 seconds?

SamiEvoX
10-04-2009, 04:38 PM
Anyone figured out if gravel mode is the quickest yet. Several people were saying that gravel mode shaves .3 off the quarter mile. Has anyone done several legit runs in all 3 modes for comparison?
SamiEvoX
10-05-2009, 05:52 AM
I'm guessing thats a no, lol.
SmokinX
10-05-2009, 06:03 AM
Give it a day or two, some ppl might not be able to sign in right away. I'm sure someone has been able to test the different settings out.
smith
10-08-2009, 03:55 AM
my guess the more power you run the less you want the gravel setting (70% tq front 30% tq rear). the more power you run the more your tires are going to slip 50 50 is best at that point. just my thoughts...
hollywood_X
10-08-2009, 04:03 AM
my guess the more power you run the less you want the gravel setting (70% tq front 30% tq rear). the more power you run the more your tires are going to slip 50 50 is best at that point. just my thoughts...

Where does eveyone keep getting that the power gets split?
TRUSTcompany9000
10-08-2009, 04:05 AM
Which mode you are in has nothing to do with Torque Split. What it actually does is determines how long and how strong the ACD will engage the limited-slip of the center differential before allowing to go into a “free state." Tarmac will go into a free state almost immediately and provide the most clamping force, Gravel will take about 2-3 seconds and lands in the middle, and Snow will take 4-5 seconds with the least clamping force.

Learn all about it here:

http://forums.evolutionm.net/evo-engine-turbo-drivetrain/175195-acd-article-answers-everybody.html
Wicked White
10-08-2009, 04:10 AM
http://www.evoxforums.com/forums/showpost.php?p=202351&postcount=4
TRUSTcompany9000
10-08-2009, 04:12 AM
^ Yup, same thing.
Wicked White
10-08-2009, 04:13 AM
haha i fail
TRUSTcompany9000
10-08-2009, 04:15 AM
Don't mess with my uber fast posting power! lol
hollywood_X
10-08-2009, 04:45 AM
Good info, but I still wonderwhere the mis-information comes from.
TRUSTcompany9000
10-08-2009, 05:10 AM
I think that's one of those questions I don't think we want the answer to :shades:
on2it
10-08-2009, 05:31 AM
or conveniently forget after you find out. :) I know I forget.
smith
10-08-2009, 09:54 PM
Where does eveyone keep getting that the power gets split?

read it somewhere dont recall where lol so i cant even answer that question. now the settings make a lot more sense all about the clamping time and force.
TRUSTcompany9000
10-08-2009, 10:03 PM
Good, you learned something useful and forgot something that you didn't need :thumbup: