Ok, so now I feel like a dumba$$ cause I can't get the logging to work...I took out all the triggers so now it actually writes a .csv file but it spits out 0 for all the parameters save TPS.

All the parameters log just fine in EVOScan so I'm thinking its gotta be my config file, I really don't see anything wrong. Maybe another set of eyes (or hundreds) can help...I've attached my logcfg.txt

By the way, the CruiseLight address IS correct for MRs. I tested/verified that in EvoScan. Toggles from 3 to 35 in EVOScan which corresponds to bit 5...so that should work.

verkion

looks fine. what rom version do you have? you have mode23 enabled I assume?

TPS works but others don't?

Mode23 enabled on this ROM?

Is the logcfg.out file Zero KB? Can you attach it?

Hey guys, yeah, I have Mode 23 enabled :-) (That's how I tested the CruiseLight Parameter ID/Address.) I'm running ROM 21 (52690021). The .out file is valid, in that it reflects all the lines properly, and shows no errors.

verkion

Anyone have any ideas? I can definitely log using EVOScan. Could it be something to do with my ROM? Tephra??? :-P

verkion

I am also using the 21 ROM in my MR. I will post my cfg file later for you to test with.

More "just to make sure" things:

You updated the firmware on the OP?

(I don't think that even TPS would work, but it's always good to start from the beginning.)

is rom 23 something that comes with the tactrix cable? and where can i buy an evoscan??

is rom 23 something that comes with the tactrix cable? and where can i buy an evoscan??

Blu, if you have basic questions, find a relevant thread to post them in, or if (after searching) you can't find anything, post your own thread. Nobody will mind you asking questions (we all started from Newbie Status), but there are proper places to do it!

There is plenty of information available on the forum:
(http://www.evoxforums.com/forums/showthread.php?t=22140)

If you can't find what you're looking for, there are other options:
http://lmgtfy.com/?q=evoscan&l=1

BluEvoX88...you gotta stop trolling everyone's threads. You've asked the same question in at least 4 threads now, and everyone has told you where to get the cables. Nobody is going to take you by the hand and teach you everything there is to know, not unless you're willing to take a course.

ALL the information you need is ALREADY posted in this forum by a number of very knowledgeable people. Honestly, since you clearly ARE NOT willing to do this, despite numerous attempts from others to point you in the right direction, I would suggest you go have your car professionally tuned and call it a day.

verkion

I too am having trouble getting this to work.

I have mode23 enabled and I successfully get a .out file but no .csv file.

In the .out file everything reads as "0".

I too am having trouble getting this to work.

I have mode23 enabled and I successfully get a .out file but no .csv file.

In the .out file everything reads as "0".
romid? config file?

More "just to make sure" things:

You updated the firmware on the OP?

(I don't think that even TPS would work, but it's always good to start from the beginning.)

Did you update the OP? Might be something do with it.