about three weeks ago i made the trip to evod to get the ets turbo kit, 1100cc fic injectors, ets 3.5 intercooler, ets testpipe, fuelpump,and my zeitronix zt2 installed. the dyno we went to reads extremely low. just for some sort of comparison a fully built subaru makes 380whp on same dyno. richard installed and tuned the car. the car right now sets at 25psi. full boost is by 4700. i love the new setup and will never go back to a stock frame turbo again. town driver is alot better because of were the spool is at. i havent had any codes or issues w the car. my turbo was on back order and is put the guys at ets behind. michael at ets 2 dayed the parts just to get them to me in time for the install. they have great customer service. the car has crazy torque steer from a 60roll. here are some pics of the car, the turbo kit, and a couple of videos. tuned on 93pump

http://i653.photobucket.com/albums/uu258/speedfreak228/img025.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1853.jpg
http://www.youtube.com/watch?v=tU5XKwbPeMA
http://www.youtube.com/watch?v=Lg_KiOKBUw0
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1859.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1858.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1858.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1856.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1855.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1855.jpg
http://i653.photobucket.com/albums/uu258/speedfreak228/DSCF1853.jpg

That's a mean squat.

She moves but maybe on a closed course would be better to do 120+

That's a mean squat.
thanks
She moves but maybe on a closed course would be better to do 120+
i agree,but there isnt any closed courses around here. the drag strip is but i havent had a chance to go. so i had to make do. and the road were i live isnt very busy.

very nice! Wish I had the cash to go that route... car sounds mean

Car looks good bro and moves

That baby is flying :).... How many to wheels

What turbo kit you got from ETS???

I think it said 401 but looked like alot more than that

That screaming really brings back memories.

I love that scrieming :)...

I think it said 401 but looked like alot more than that

Yeah, it does seen like is pooling alot more than that... Is this the T4???

What turbo kit you got from ETS???
Ets t3 kit w precision 5857 .63 ar.
I think it said 401 but looked like alot more than that
I feels like a whole lot more. The guy n the z06 was shocked:shades:
Thanks for all the nice comments

who tuned this car? did they adjust the mivec to see if they can get it to spool faster?

Richard from evolution dynamics tuned it. He is working on some mivec changes and a 28psi tune

i know once you get your mivec changes you should see few hundred rpm shaved off spool time. 28 should be alot more fun! Can you post your dyno sheet?

i know once you get your mivec changes you should see few hundred rpm shaved off spool time. 28 should be alot more fun! Can you post your dyno sheet?

when we road tuned full spool was at 5300. w mivec tuning he brought it down to 4700. on the 28 psi tune it will have the max he can adjust the mivec. he is going to put the new mivec changes on the 25 psi tune that i have now. there wont be any dyno #'s. i live 3.5 hours from the shop so he just make changes and i datalog and send back and then he changes it till we get it right.

when we road tuned full spool was at 5300. w mivec tuning he brought it down to 4700. on the 28 psi tune it will have the max he can adjust the mivec. he is going to put the new mivec changes on the 25 psi tune that i have now. there wont be any dyno #'s. i live 3.5 hours from the shop so he just make changes and i datalog and send back and then he changes it till we get it right.

internet tunes with this big of a turbo would scare me, but more power to you.

Good luck on the 28psi tune, should be sweet!

internet tunes with this big of a turbo would scare me, but more power to you.

Good luck on the 28psi tune, should be sweet!

should be fine. the only diff is he isnt setting in the car w me

should be fine. the only diff is he isnt setting in the car w me

It's not the tuner, its the logging software...you are relying on the factory knock sensor and probably a wideband that isn't completely accurate.

Just be careful man, don't want to read about you blowing your motor, that is a nice setup:)

Congrats

what is that noise on the 2nd videos?

i like the setup

It's not the tuner, its the logging software...you are relying on the factory knock sensor and probably a wideband that isn't completely accurate.

Just be careful man, don't want to read about you blowing your motor, that is a nice setup:)

thanks for your concern. maybe i wont blow it up:D. i am using evoscan that what he used

what is that noise on the 2nd videos?
the screaming noise is my o2 dump
Congrats
thanks man
i like the setup
thanks

the screaming noise is my o2 dump

thanks man

thanks


i assume that you have a very nice radar detector.....v1 or any other.

i assume that you have a very nice radar detector.....v1 or any other.

not the best but it works

You should drive my car and then you would know loud lol. O2 dump and EWG, no mufflers or anything.........loud

You should drive my car and then you would know loud lol. O2 dump and EWG, no mufflers or anything.........loud

dang that probly too loud for me. got any videos

I got plenty lol. Let me load some up for you

http://www.evoxforums.com/forums/showthread.php?t=18643
http://www.youtube.com/watch?v=lnAcOV1rZFo&feature=player_embedded

I got plenty lol. Let me load some up for you

cool thanks. i want mine to be louder when i idle. mine lopes hard and its loud but not loud enough