I have a stock evo x gsr. I just got the cobb access port and installed the stage 1 91 gsrv106.ptm map and am getting a 2.5 knock since. The only thing i can think of is install a different map then reinstall the current.

Any other suggestions? Attached are the most recent logs.

Have you tried logging with the stock calibration?

The highest knock I see in your second log is 1.05 which is in tolerance. Everything seems fine

The stock map i get a 2.1 maybe i am just paranoid.

What year is your car?
What mods?
What gas?

That doesn't look normal to me, but you also need to do some real WOT pulls and log them. Doesn't look like you even go past 5k rpms in any of those. What gas is that?

even the stock tune will knock. it's just random knock, i had this before on my tune and since im paranoid i asked the tuner to check and drive the car. the ecu will just adjust it's timing when you knock. but let's say you are knocking on 3 to 4000rpm continiously everytime. mean your ap will just keep flashing that knock count and not just it flash 2.4 and then it's gone. random it's ok. i cannot see your log.

to give you an idea of a bad knock ....this is a lot and not just random.

http://www.youtube.com/watch?v=_XUZH2pk3dQ

http://www.youtube.com/watch?v=PBSVMFKl2uQ&feature=related

http://www.youtube.com/watch?v=-Gq9GTPeFow&feature=related

Looks to me like your slipping the fuck out of your clutch. I would reflash the map that best suites your gas and mods and do a log just after the reflash.

3rd gear from 2000rpm to redline @ wot thats it.

Not trying to hi-jack, but heres a 1-5 gear wot pull.
with occasions of knock, ranging from .35-1.40

stage 2 93 oct.

normal?

Not trying to hi-jack, but heres a 1-5 gear wot pull.
with occasions of knock, ranging from .35-1.40

stage 2 93 oct.

normal?

Yours look normal but just like the OP neither of you have load boost fuel reading. Both of you need to update your AP's firmware or contact Cobb about it not logging.

i cannot see your logs...

but this is a bad knock'''

http://www.pencomputing.com/rsx/The_Hondata_KPro103_files/image003.jpg

Yours look normal but just like the OP neither of you have load boost fuel reading. Both of you need to update your AP's firmware or contact Cobb about it not logging.


Holloywood, I do have it enabled.

It reads 0 all the way down. Normal?

Load Boost / Fuel has been wrong since day 1 release for 2010's. There is nothing they can do about it.

I've been telling Cobb about this since January. I'm now selling my AP and switching to ECUFlash. I cannot tune my fuel tables without it.

Load Boost / Fuel has been wrong since day 1 release for 2010's. There is nothing they can do about it.

I've been telling Cobb about this since January. I'm now selling my AP and switching to ECUFlash. I cannot tune my fuel tables without it.

haha, fkn great.
I hope it will be addressed in the next firmware update

Oh 2010 model... makes sense and they are working it.