Did a search, couldn't find anything...

Meat had an engine bay thread...thought that was good stuff..

Now, lets see shots of your current interior setup

:godance:

***reserved***

*reserved*

So here's a crappy night pix with my camera phone of my shift boot...

http://www.evoxforums.com/forums/attachment.php?attachmentid=20535&d=1297833483

All I have done so far to the interior is get a suede shift boot for my SST from kidneythief13:

http://i647.photobucket.com/albums/uu196/jeepwrnglr21/DSCN2708.jpg

here is my interior so far!!

http://i96.photobucket.com/albums/l185/brandyn_48/DSC_0010.jpg

here is my interior so far!!

http://i96.photobucket.com/albums/l185/brandyn_48/DSC_0010.jpg

nice seat :)

here's a shot from my facebook....

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash1/182470_187567324617379_100000923390894_423687_8294392_n.jpg

thanks the passenger seat is its twin :godance:

liking the louie vuton or how ever it is spelled

brandyn - looking good!!! How is the visibility changed out the driver's side window/windshield with that gauge pod? I was thinking bout getting the same one for my car once I get some more :$:.

honestly it makes it a bit harder i find that both sides are bad for blind spots!!! but the gauge pod makes the driver side a bit worse but i could careless lol

So here's a crappy night pix with my camera phone of my shift boot...

http://www.evoxforums.com/forums/attachment.php?attachmentid=20535&d=1297833483

where did you get the LV shift boot and arm rest!! i want one!!

where did you get the LV shift boot and arm rest!! i want one!!

pm me on facebook :p

shit is not cheap lol

howie is a ricer.

Ill add to this thread when I get my gauge pod done. It's drying right now. :)

rice rice baby, to go, to go

You want it, you got it :dancebanana:

http://img593.imageshack.us/img593/273/mg0039p.jpg




http://img30.imageshack.us/img30/3425/mg9809.jpg

I need to get a sexy picture of Eyler and Fractur3 in my backseat.

I'll even provide the skirts.

You want it, you got it :dancebanana:

http://img593.imageshack.us/img593/273/mg0039p.jpg





http://img30.imageshack.us/img30/3425/mg9809.jpg


pink undies ftw
no undies for even more win.
photoshoot at the Oakhill Mortgue/Cemetary. full of win. lmao

hope ur exhaust isn't too loud Anh, cuz u'd disturb all those resting souls.

good idea, ill take a pic when its not so cold out
heres one for nowhttp://i187.photobucket.com/albums/x86/lilyluvr77/interior.jpg?t=1298048207
only things in interior that arent supposed to be there are my 2 gauges and $10 gauge pod, senna sig sticker, and schroth rallye 4 harness. oh yeah and my walmart air fresheners that my mother-in-law loves the smell of, and everyone says are cool

good idea, ill take a pic when its not so cold out
heres one for nowhttp://i187.photobucket.com/albums/x86/lilyluvr77/interior.jpg?t=1298048207
only things in interior that arent supposed to be there are my 2 gauges and $10 gauge pod, senna sig sticker, and schroth rallye 4 harness.

I actually favor that location where the two gauges/pod are located underneather the HVAC controls. :) if and when i do get gauges, i might consider this route...

I actually favor that location where the two gauges/pod are located underneather the HVAC controls. :) if and when i do get gauges, i might consider this route...


if you do decide to go with this location, do NOT get the Summit racing pod. instead go for the glowshift one from amazon. its $9, looks stock and it fits perfectly without any tape or screws, just push it in and it stays!

if you do decide to go with this location, do NOT get the Summit racing pod. instead go for the glowshift one from amazon. its $9, looks stock and it fits perfectly without any tape or screws, just push it in and it stays!

nice, pix of said pod?

I'll have to take pics and post my current setup, then the one I'm switching to as soon as I stop being lazy.

I'll have to take pics and post my current setup, then the one I'm switching to as soon as I stop being lazy.

and cut back on the booze too :)

thats the gauge pod in my pic, matches the interior plastic perfectly, i used a drill and some screws but my car vibrates more than others with my stiff engine mount

thats the gauge pod in my pic, matches the interior plastic perfectly, i used a drill and some screws but my car vibrates more than others with my stiff engine mount

so this is the same one u got off amazon?

yup, got xmas gift on amazon so i looked at their gauges and pods, and figured even if pod sucks, its only $10

yup, got xmas gift on amazon so i looked at their gauges and pods, and figured even if pod sucks, its only $10

so, what am i looking for as far as my search or keywords go on amazon?

howie, i just put in gauge pod

so annoying driving with her whining right behind my headhttp://i187.photobucket.com/albums/x86/lilyluvr77/suzieseat.jpg?t=1298336537
daily routine, taken for people who wont allow their dogs in their precious evohttp://i187.photobucket.com/albums/x86/lilyluvr77/jjsuzie.jpg?t=1298336742

howie, i just put in gauge pod

so annoying driving with her whining right behind my headhttp://i187.photobucket.com/albums/x86/lilyluvr77/suzieseat.jpg?t=1298336537
daily routine, taken for people who wont allow their dogs in their precious evohttp://i187.photobucket.com/albums/x86/lilyluvr77/jjsuzie.jpg?t=1298336742

she's so cute, she looks just like hotdog :dancebanana:

good thread. im ready to start doing up my interior. been searching for the right fabric i want for the door panel inserts lately. i want probably either alcantara or some type of sport mesh.

so, what am i looking for as far as my search or keywords go on amazon?


there you go buddy. this is the one i have and honestly, i am shocked at how OEM it looks and fit without any tape or screws :)

http://www.amazon.com/Universal-Dual-Gauge-Console-Dash/dp/B001PHNH2K/ref=sr_1_1?ie=UTF8&qid=1298338060&sr=8-1

yes it will stay like that, but i chose to angle mine so gauges can be read easier, this is why i thought securing with screws was necessary

yes it will stay like that, but i chose to angle mine so gauges can be read easier, this is why i thought securing with screws was necessary


well i am only using it as a temporary solution so i didn't want to drill anything just yet.

Should I just get a gauge pod, or go for the clean look and get maybe hks camp 2?
I have a JVC head unit it can be displayed on.

Should I just get a gauge pod, or go for the clean look and get maybe hks camp 2?
I have a JVC head unit it can be displayed on.


well, if you want to look at your AFR, camp won't help you for example.

MOOOAAARR!!
I want to see more gauge setups, shift knobs/boots, seats, harnesses, door inserts, radar detectors, audio, etc.

Is there anyone else who really hates how the pillars and headliner are grey and the rest is black? I see this on soooo many cars and it bugs the hell out of me. Why the two tone I want it all blacked out.

Here are the three threads I posted, I'll do a new one when I do front seats and center console.
Initial alcantara:
http://www.evoxforums.com/forums/showthread.php?t=52715
Rear Delete:
http://www.evoxforums.com/forums/showthread.php?t=56248
Photoshoot:
http://www.evoxforums.com/forums/showthread.php?t=55413