Today we did two runs into the 11's here are the slips and vid .

http://i32.tinypic.com/dg06c8.jpg

http://s271.photobucket.com/albums/jj158/Kerrplunk_photo/?action=view&current=1199113.flv




This car is running a stock un-modded turbo and has NO TUNE !!

What mods are on this car with no tune but in the 11s

What mods are on this car with no tune but in the 11s


Full exhaust

intercooler pipes

intake

FMIC

custom header


EBC

and some stickers :thumbup:


this is a 100% stock UN-modded turbo !!!

congrats!! it must be the stickers! :)

what sized piping did you use for :
- the exhaust
- the intake
- the intercooler

congrats!! it must be the stickers! :)

what sized piping did you use for :
- the exhaust
- the intake
- the intercooler


The sticker FTW !!!! 3" and 2.5" on the piping

some more info :http://forums.evolutionm.net/showthread.php?t=348162

Was that an SES going off at the end of the track in your vid, or what is the beeping?

And are you guys making enough power to actually see the fueling starting to lean out above 10:1 afrs?? Or how was that accomplished. What's the smoothing on the dyno??

WILL you be selling parts too?

My god, what was that you were running against?

My god, what was that you were running against?

LOL , that was a twin turbo Fox body stank , its actually a low 10 second car but running mid 10's because of the crappy heat ..The owner is a very cool older guy we had jokes all night long for eachother.

Impressive numbers.

Boost level???

What octane? How much boost? Any CELs?

Either way, nice driving!

What octane? How much boost? Any CELs?

Either way, nice driving!


shitty 93 with one gallon of 110 . hits about 27lbs then drops to about 24lbs , zero cels :thumbup:

Impressive numbers.

we're going back this friday so stay tuned . When we did these runs it was hot as hell , we'll run the run a bit later on friday - this heat is owning us:(

wow - into the 11s already...

no ones taking their time are they?

nice run with those mods... I cant believe the power you are putting down with just bolt-ons. thats really exciting.

So...what you're telling me is that the Evo got beat by a Mustang...


Just playing man. Good times!

wow - into the 11s already...

no ones taking their time are they?

nice run with those mods... I cant believe the power you are putting down with just bolt-ons. thats really exciting.


Well , I just didn't wanna wait :rock:

So...what you're telling me is that the Evo got beat by a Mustang...


Just playing man. Good times!

hahaha , thats messed up ... That stank is actually done right , it moves even running like crap - it moves !!!! Yesterday was a very hot day for the track so we're hoping for a cooler day on friday .

LOL , that was a twin turbo Fox body stank , its actually a low 10 second car but running mid 10's because of the crappy heat ..The owner is a very cool older guy we had jokes all night long for eachother.

Ahh ok. I was watching the video and I just saw the little bugger pop on by in the corner lol. Fast as hell @_@

Ahh ok. I was watching the video and I just saw the little bugger pop on by in the corner lol. Fast as hell @_@

that thing can actually run 9's but he still has a few traction issues , its FAST!

Now, who is going to get into the 10's first?

Now, who is going to get into the 10's first?



well , not too sure on that one but all I can say is that I'll be trying ...

well , not too sure on that one but all I can say is that I'll be trying ...
I am sure you will be! You guys have done some great stuff!

I'm assuming you can drop atleast another .3-.5 of a second by loosing a bit of weight (from the car) and a few more practice runs.. what do you think?

I am sure you will be! You guys have done some great stuff!



our 11.92 run was at a spike of 26lbs and holding 24-25lbs , next time we'll be running 30lbs :godance:

I'm assuming you can drop atleast another .3-.5 of a second by loosing a bit of weight (from the car) and a few more practice runs.. what do you think?


Its VERY important to ME for us to make the runs on full interior ! The ONLYTHING missing from our car is our spare tire and front support which we took out only to fit our custom intercooler . I strongly believe that people should know that their cars WILL do WITHOUT them taking out half the car . I sometimes run the car with my kids baby seat in it - people love that - lol

that was so my idea!!!

Its VERY important to ME for us to make the runs on full interior ! The ONLYTHING missing from our car is our spare tire and front support which we took out only to fit our custom intercooler . I strongly believe that people should know that their cars WILL do WITHOUT them taking out half the car . I sometimes run the car with my kids baby seat in it - people love that - lol

I couldn't agree more. I'm not stripping mine for sure.

I couldn't agree more. I'm not stripping mine for sure.


The way I see it is this . Lets say I tell you I just ran a 10.2 on a stock turbo . Then you ask - " what are your mods" - I then say ( with-in my list of mods I add ) I took out 400lbs from my car , all I have in my interior is the steering wheel and boost gauge . I'm sure you and many others will NOT take your 33K car strip it and risk damage just to get a good run at a track - that makes no sense to me and it looks you feel just the same .. My car will run whatever it will run to whatever limits it has with all my parts still in it , I will never take anything out for any reason ...

Full exhaust

intercooler pipes

intake

FMIC

custom header


EBC

and some stickers :thumbup:


this is a 100% stock UN-modded turbo !!!

Er....sorry for the noob questions but what is an FMIC and an EBC? And where did you get the custom (exhaust?) header? I assume it is a straight bolt-up to the turbo and cylinder head?

Regards

K.

Er....sorry for the noob questions but what is an FMIC and an EBC? And where did you get the custom (exhaust?) header? I assume it is a straight bolt-up to the turbo and cylinder head?

Regards

K.




FMIC = front mount intercooler

EBC = electronic boost controller


The header is a 100% bolt-on and built by us . The exhaust was done by ExhaustDepot.com in south Florida .

right on xtremeboost.

Did you get the matching Recaro seats? lol


Its VERY important to ME for us to make the runs on full interior ! The ONLYTHING missing from our car is our spare tire and front support which we took out only to fit our custom intercooler . I strongly believe that people should know that their cars WILL do WITHOUT them taking out half the car . I sometimes run the car with my kids baby seat in it - people love that - lol

Is your intake custom as well? I've read about a lot of problems with intakes. Seems as though the cars pull harder and run better with the stock intakes. Apparently they MAF sensors are super sensitive???

I'd like to lock one down in my sites that actually does something positive.

Did you get the matching Recaro seats? lol


Shes now old enough for it , we're going out over the weekend to get her one.

Is your intake custom as well? I've read about a lot of problems with intakes. Seems as though the cars pull harder and run better with the stock intakes. Apparently they MAF sensors are super sensitive???

I'd like to lock one down in my sites that actually does something positive.



Well , after testing out a few designs I ended up where I am now and I have zero problems with my intake and others ! The issue sometimes is that some just make and sell what "looks" good and fits well , but with the X that all goes out the window in a hurry !!! The stock intakes are actually junk that need to go - LOL .

.255 and .483 reaction times!! That other guy shouldn't have even been allowed on the track

haa.. nice old post.. gotta get the posts back up!

.255 and .483 reaction times!! That other guy shouldn't have even been allowed on the track


Reaction time only comes in to play when you're actually racing , running to get a time slip - who cares .

Reaction time only comes in to play when you're actually racing , running to get a time slip - who cares .

Oh, I didn't realize they were just doing time-runs. But still?

Bump for info on my stuff?

Bump for info on my stuff?


I will post those pictures here in just a few :shades: ... At last we're getting back to normal around here :thumbup: .. I'm a happy beaner :godance:






But a car-less one too :mad:



.

http://i38.tinypic.com/2cxjfus.jpg

http://i37.tinypic.com/2lxto4l.jpg

http://i36.tinypic.com/ip8cxi.jpg

http://i38.tinypic.com/2cxjfus.jpg

http://i37.tinypic.com/2lxto4l.jpg

http://i36.tinypic.com/ip8cxi.jpg

i would like first dibs on this please.

i would like first dibs on this please.
It's my custom kit.

It's my custom kit.

and its hot fire!

http://i36.tinypic.com/ip8cxi.jpg
Looks fucking sick Frank.
Looks close to the hood, will I require a Turbo heat Shield?

Looks fucking sick Frank.
Looks close to the hood, will I require a Turbo heat Shield?


only the cold parts are near the hood about 3" away which is not really that close , no worries ...:thumbup: .... Just worry about getting some slicks now .........

only the cold parts are near the hood about 3" away which is not really that close , no worries ...:thumbup: .... Just worry about getting some slicks now .........

Slicks, clutch, flywheel, injectors, fuel pump, re-tune...

pure sexness right there....

what tires were on the car during the 11.9 runs?

what tires were on the car during the 11.9 runs?


we had some 245's on which I forgot what brand but heres a picture of them

http://i36.tinypic.com/nco8ch.jpg

street tire, drag radial, slick, et street, etc?

La turbina esta stock me imajino

street tire, drag radial, slick, et street, etc?


100% crappy street tires !! We're yet to make a pass on slicks .

La turbina esta stock me imajino

I had to ask my friend to read this for me but yes we're still on a 100% stock un-modded factory turbo !!!! My turbo is in the same condition as Mitsubishi installed it at the factory :rock:

100% crappy street tires !! We're yet to make a pass on slicks .

awesome!!

been to the track lately

been to the track lately


We did go a few weeks ago and ran 32lbs but all we did was spin badly :mad: . We think is because the tire were not broken in yet so we'll try again tomorrow at 28-29lbs looking for an 11.7 run ..

There are some guys up here in Canada that are slowly catching up to you Frank, better get on it!

There are some guys up here in Canada that are slowly catching up to you Frank, better get on it!

I will answer you with a random picture of my car , I will be fully tuned in a matter of days ....

http://i38.tinypic.com/og9elh.jpg



PS : tell them all i said good luck




..

Whats in the fancy box by the intake?

Whats in the fancy box by the intake?


Thats actually an ECU protector box and its also an oil catch-can :shades: I hate the wires there and this cleans-up that area very well and it also protects the ECU from water .




..

I really like your engine cover.

I really like your engine cover.


thank you sir , i like it as well .....






..

Oh btw, I got some magical stuff you might like

Oh btw, I got some magical stuff you might like


If thats the case maybe I may have some engine covers for you :shades:




...

Thats actually an ECU protector box and its also an oil catch-can :shades: I hate the wires there and this cleans-up that area very well and it also protects the ECU from water .

..

very clean.

very clean.

Thank you sir :shades:




..

does the engine cover also cover the intake?

does the engine cover also cover the intake?


There's an engine cover and a cover for the coils . The stock cover covers everything ..

weekly bump as to when I should see my kit,,,,

weekly bump as to when I should see my kit,,,,
When's this getting shipped out?

congrats!! it must be the stickers! :)

Powered by Honda no doubt.