ACTIVE MOD LIST:

Ultimate Racing Downpipe
Ultimate Racing Ceramic Hi-Flow Cat
Ultimate Racing Catback Exhaust
Ultimate Racing FMIC UICP LICP
Ultimate Racing Boost Pill
Evo X BPV
Sprint Booster
K&N Drop-In Filter
Swift Springs
Work Emotion CR Kai 18x8.5 Bronze
Hankook Ventus V12 Evo 235/40

MOST RECENT DYNO RESULTS:
http://i.imgur.com/J7iP3l.jpg

I will update this thread whenever I get new updates/news!

Went to see Cam @ Lightspeed about a month ago and I must say... Wow he is a really great guy and a really great tuner. I will keep this short as I am still tired as hell, but I definitely recommend him to anyone in the Alberta area!

http://i.imgur.com/yhfCLl.jpg

http://i.imgur.com/YyucBl.jpg

http://i.imgur.com/knLQDl.jpg

Here is a video of a pull:
http://www.youtube.com/watch?v=ra0I1xlF6sY

very nice, gonna make a list of future mods or just gonna keep it current?

Got my lip on this week.

http://i.imgur.com/JQF0Bl.jpg

http://i.imgur.com/XoOSgl.jpg

http://i.imgur.com/pz7zgl.jpg

http://i.imgur.com/x7iDkl.jpg

The fitment wasnt 100% perfect which upsets me. I could not get both sides on perfectly flush...

Here are the 2 sides for comparison

Flush:
http://i.imgur.com/IWEFml.jpg

Not-So Flush:
http://i.imgur.com/UnQAul.jpg

Let me know what you think!

very nice, gonna make a list of future mods or just gonna keep it current?

Other than chasis work I'm pretty much done for now. Dont wanna turbo swap for a while :P

Looks good man, brake upgrades? Could probably find some brembo calipers and I got the rest of the stock X setup.

the lip fitment issue could it be because it's meant for a X which is slightly wider? Just guessing as I'm not sure it would affect that area but maybe?

To put X Brembo Brakes on an RA would be crazy expensive. I'd be better off just buying a stoptech system. I think I am just going to get EBC/Hawk pads and some dimpled/slotted rotors and be good with that for now.

the lip fitment issue could it be because it's meant for a X which is slightly wider? Just guessing as I'm not sure it would affect that area but maybe?

Naw man, the lip was custom made by JDP to fit an RA. The fitment is barely off and I bet if I were to take it back off I could get it to fit properly.

Not that expensive, used calipers might not be that much, something to do maybe with the turbo swap, the rotors and pads will have to sit I guess lol, can't wait to see where your ralliart goes, not a fan of those tails on the X but on the ralliart just seems better suited.:+1:

Naw man, the lip was custom made by JDP to fit an RA. The fitment is barely off and I bet if I were to take it back off I could get it to fit properly.

ahh okay then that throws that out ;)

Not that expensive, used calipers might not be that much, something to do maybe with the turbo swap, the rotors and pads will have to sit I guess lol, can't wait to see where your ralliart goes, not a fan of those tails on the X but on the ralliart just seems better suited.:+1:

Thanks a lot man, yeah I like the tails. I hope to track her soon, but I need my sway bars before then :P

ahh okay then that throws that out ;)

Its one of those things that if I hadnt mentioned the slight mis fit of it, you prob wouldnt have noticed it on saturday :D

Canadian Mitsubishi Owners Day was great today! Had a ton of MECA guys out there and it was an overall great time. Took home a lil something too :P

http://i.imgur.com/Omk0L.jpg
http://i.imgur.com/gl2LV.jpg

Congrats man! Lookin good under da hood!:p

totally grats man, was great meeting you and the rest of the cowtown crowd, had a great time.

totally grats man, was great meeting you and the rest of the cowtown crowd, had a great time.


Thanks man, can't believe I beat half the Evos there :p

Good job aaron!

Just got my new Password: JDM Delrin shift knob. Looks great and feels great!

http://i.imgur.com/5qw3bl.jpg

looks great with that shift boot!

KidneyThief did a great job on that :)

Thanks again for the washer! :P

So I ordered a mid-pipe with a mini muffler today through ultimate racing, my car is too damn loud. I will post before and after sound clips once I get it on!

Got the mini muffler installed today. Love it so far!

http://i.imgur.com/HeqM1l.jpg

Before:
http://www.youtube.com/watch?v=NP01jc2Y9GY

After:
http://www.youtube.com/watch?v=35v9L2oj9rA

sounds good, i am happy to see i am not the only cat running around with soot on their bumper. also a good easy clean for the soot is rim cleaner :) doesnt fade the paint and comes off like water

It comes off really easy by just using a soapy microfiber sponge too :P

First time I washed it off I used the stupid brush at a car wash and now there are a lot of small scratches around the sooty area.... :(

Good thing its not burning your bumper, which is what I though at first. Car looks good

Good thing its not burning your bumper, which is what I though at first. Car looks good

I wish it was doing this to his car... then maybe he wouldn't steal the "prettiest ralliart" awards from me...

http://www.speedyzx.com/Shasta2004/Day1DSCF0102.jpg

just kidding aaron... i don't wish that on anyone... even you! <3

Haha thanks Pounder!!

Got my PWD:JDM Engine Dress Up Kit today. Here are some sh!tty iPhone pics:

http://i.imgur.com/AxSy4l.jpg

http://i.imgur.com/69hfrl.jpg

http://i.imgur.com/Mgso1l.jpg


I really like how they look on my engine cover! Was lookin for some good red bolts!

awesome RA man! :thumbup:

awesome RA man! Almost as nice as Pounders :thumbup:

Fixt.

PS - I wish I would've jumped in on that group buy now... looks dope bro. Missed you at the MECA meet :mad:

:( I wish I coulda went, missed you too big guy!

I've had a few people PM me asking if I can post videos of my car from the outside. I dont have any recent ones so I'll post some older ones. Sorry for spammin my vids :P

http://www.youtube.com/watch?v=rGjRGhJKZRk
http://www.youtube.com/watch?v=82M6deefPHo
http://www.youtube.com/watch?v=A8XmlZ1Mgys

I really like those wheels!