|
: Will these clear the brembos? Jackygor 11-02-2008, 07:31 AM 5 Zigen ZR+520 18x9.5 Offset +30. I have a choice of +30, +20, and +37. Will the +20 offset clear the brembos? http://i279.photobucket.com/albums/kk139/evonebo/DSC01000.jpg jApOrMs 11-02-2008, 11:53 AM that is what i was looking at too? bump for answers maverick_124 11-02-2008, 12:06 PM i believe we run a +22 on the front and it jsut barely clears the brembos FLK 11-02-2008, 03:55 PM Jacky 19x9.5 +30 will clear the calipers fine. If you want the wheels to stick out a bit go with +20. maverick_124 11-02-2008, 04:39 PM i thought +20 would be closer to the brembos and +30 would push them out farther? FLK 11-02-2008, 04:45 PM Maverick the smaller the positive # the more it comes out. Jackygor 11-02-2008, 04:59 PM Maverick the smaller the positive # the more it comes out. Thanks FLK! I want the wheels to stick out! So +20 it is :p maverick_124 11-02-2008, 05:11 PM ohhh ok (no one ever told me about wheel off sets) so i was jsut going off into the wrong direction lol SpeedI2acerX 11-02-2008, 06:28 PM well you would think the smaller the number the more it brings it closer to the brakes but smaller makes it stick out?!1 i confuse Jackygor 11-02-2008, 06:30 PM Btw, would I have rubbing issues with +20 offset? SpeedI2acerX 11-02-2008, 06:32 PM Btw, would I have rubbing issues with +20 offset? it would depend on tire size also.. +20 would bring it out a lot and how wide are you planning on running the tires? Jackygor 11-02-2008, 07:06 PM it would depend on tire size also.. +20 would bring it out a lot and how wide are you planning on running the tires? The car I showed is running at +30 offset with 265/35/18 tires. If I were to run the same tires, would I need to roll the fenders? =( FLK 11-02-2008, 08:41 PM The car in your photo belongs to nebolic and it has been lowered, you might want to PM him if you have question about that. But 18x9.5+30 with 265/35R18 will not rub or bang the struts, and neither will +20 so either way you would not need fender work (if your MR isn't lowered) :) Jackygor 11-02-2008, 09:37 PM The car in your photo belongs to nebolic and it has been lowered, you might want to PM him if you have question about that. But 18x9.5+30 with 265/35R18 will not rub or bang the struts, and neither will +20 so either way you would not need fender work (if your MR isn't lowered) :) Umm, thanks for the input, from what I have read, he is lowered from kw -1.1 in front and -1.0 in the back. | |