attention colorado evos

[pistolpete69916]

Chet, i want that front beam! Can you ship it? The drive down to the next meet is gonna cost me more in gas than for you to ship it, im guessing. I want it so i can have jon weld that shit on then i can just swap it out.

[pistolpete69916]

Well.. here's my new setup, i had to raise the front and now i have 3/4" of wheel gap! Im embarrassed to show a pic of it lol

[chetrickerman]

Originally Posted by dylphill85

Plus Im going to be running the .76A/R housing. Not the .82 A/R. Im gonna make 500 on stock block so the larger housing is a bit overkill for the street.

read this

http://forums.nasioc.com/forums/show....php?t=2110277

[chetrickerman]

Originally Posted by pistolpete69916

Chet, i want that front beam! Can you ship it? The drive down to the next meet is gonna cost me more in gas than for you to ship it, im guessing. I want it so i can have jon weld that shit on then i can just swap it out.

wait, do you want the front or the rear crash beam?

[pistolpete69916]

Originally Posted by chetrickerman

wait, do you want the front or the rear crash beam?

Front is taken care of, would want the rear.

[dylphill85]

Originally Posted by chetrickerman

read this

http://forums.nasioc.com/forums/show....php?t=2110277

That was some good info! The new GTX30R flow like a regular 35R, but the GTX35R will have better top end. Especially when I build my block.

[chetrickerman]

Originally Posted by pistolpete69916

Front is taken care of, would want the rear.

The rear would cost more to ship, its heavy

Originally Posted by dylphill85

That was some good info! The new GTX30R flow like a regular 35R, but the GTX35R will have better top end. Especially when I build my block.

Yea, I was wrong, the GTX3582R has the same flow rate as the HTA3582

[dylphill85]

Originally Posted by chetrickerman

Yea, I was wrong, the GTX3582R has the same flow rate as the HTA3582

Im gonna run the .76A/R housing tho. So spool will be better. This turbo will give us some good data on the new GTX35R. I don't know of any Xs running them. My buddy is running the GTX3076R on his K20 EP3. Thing is mean for only 8psi.

[linkbeat]

Originally Posted by pistolpete69916

Well.. here's my new setup, i had to raise the front and now i have 3/4" of wheel gap!

Need side pics! What are the tire specs?

[pistolpete69916]

275/35

Im considering buying CE28's in 18x9.5 +15.. since.. this setup is too fucking much and i cannot go lower at all. I have wheel gap don't wanna post pics, looks like truck!