Torque Solution Products!!! EVERY ITEM IN STOCK!!!!

[AWD Motorsports]

Below is most of the lineup from Torque Solution.. Everything is in stock ready to ship!!! PM FOR PRICING or email Sales@awdmotorsports.com




Torque Solution short throw shifter is a direct replacement for your long throw stock unit.Our shifters are made from 4130 Chromoly steel and are Cnc machined to precision tolerances .After this they are set out to be chrome plated to last a lifetime.This is the best mod for your ride.

Features:
- 32% throw reduction
- 1.25" height reduction
- 4130 Cr-Mo steel
- Installs in under 30 minutes
- Compatiable with stock and aftermarket shift knobs
- Changes the factory offset to center shifter closer to the driver
- Life Time Warranty
- Made in USA



The solid differential mount will eliminate movement of the rear end in the subframe. By replacing the rubber mount with this solid 6061 billet unit you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Reduces the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-Road Race torture tested
-6061 anodized billet
-25% Lighter than Stock
-LifeTime Warranty
-Made in USA

These Solid bushings are much harder compared to the OEM units. By replacing them with these harder units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-6061 Anodized Billet
-LifeTime Warranty
-Made in USA



These Solid Polyurethane bushings are much harder compared to the OEM units. By replacing them with these harder Polyurethane units you are able to get rid of the unwanted slop and flexing of the stock units which allows for the power to go into rotating the tires, instead of flexing the rubber. Giving you better feedback, sharper response, more predictability on throttle input, along with eliminating annoying clunking during hard shifts.

-Eliminates the " CLUNK " when shifting hard
-Reduces wheel hop / traction loss
-Improved 60fts / e.t's
-95A durometer bushings
-LifeTime Warranty
-Made in USA



Torque Solution Mounts Increase horsepower by reducing frictional lost due to poor axle geometry. Axle geometry under acceleration is very critical when trying to apply horsepower. Poor axle geometry is caused when engine and suspension center lines are changed. By installing Torque Solution Billet engine mounts engine center line are kept within precision tolerances.For street and race applications. Some vibration noticeable..

•Eliminates wheel hop / traction loss
•Improved 60fts / e.t's
•Made out of lightweight 6061-T6 billet aluminum
•600HP+ and 9sec e.t. torture tested
•Black anodized / Torque Solution Laser engraved
•75A durometer bushings
•Life Time Warranty
•Made in USA



Torque Solution includes 2 urethane bushings and a sleeve for the PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side. Upgrading your stock rubber bushings to urethane bushings will help reduce engine movement and wheel hop. This means you receive better traction, which will improve your 60ft and 1/4 mile time. Affordable price, easy install, and most importantly you'll see and feel the advantages.

Eliminates wheel hop / traction loss
Improved 60fts / e.t's Street and track torture tested
75A durometer bushings
Life Time Warranty
Made in USA



Torque Solution exhaust mounts will reduce exhaust movement and vibrations both under extreme racing conditions and daily street driving. Great compliment to any exhaust kits.

Direct Replacement

•Eliminates Exhaust Movment
•Made From high grade polyurethane
•Street and track torture tested
•75A durometer
•Life Time Warranty
•Made in USA



Torque Solution Drive Shaft Center Support Bushings will replace the OEM Rubber mounts with Delrin Polymer pieces. Doing so will allow for reduced wheel hop, improved acceleration and better E.T's. The mounts keep the propeller shaft from moving under hard acceleration, stopping and turning giving you optimal performance 100% of the time.

-Eliminates wheel hop / traction loss
-Improved 60fts / e.t's
-Made out of lightweight Delrin
-Less NVH than 6061 Billet
-Street and track torture tested
-Black anodized
-Life Time Warranty
-Made in USA



Torque Solution continues to push the limits of high performance aftermarket products with our "NEW" Shock Factor Shifter Bushings. Developed to perform under the most extreme conditions, Shock Factor Shifter Bushings bridge the gap between ordinary aluminum, brass, and cheap plastics used in current aftermarket shifter bushings by offering a unique Delrin specifically chosen by Torque Solution engineers to ensure product performance and reliability while drastically reducing shifter end play allowing for crisper, more precise shifts. All this makes it easy for us to stand behind our shifter bushings with a lifetime warranty.

Street or Track Shock Factor Shifter Bushings will always get you in gear!!!

• Improved 60fts / e.t's
• Eliminates excessive Shifter play
• Street and track torture tested
• Installs in under 30 minutes
• Life Time Warranty
• Made in USA



Torque Solution shifter base bushing kit replaces the OEM rubber bushings on the bottom of the shifter providing a more stable shifter platform and mounting points. This yeilds improved shifting feel and characteristics for years of enjoyment.

• Cnc machined 6061-T6 billet aluminum
• Installs in under 30 minutes
• Life Time Warranty
• Made in USA



Replace your long factory antenna with our billet shorty antenna, Giving you a new style to your car.

- 2" inch Tall
- Installs in under 2 minutes
- Made out of lightweight 6061-T6 billet aluminum
- Black anodized
- Lifetime Warranty
- Made in USA



Torque Solution Gate Selector Pivot Bushing eliminates much of the shifter play felt on the Evo X models. Giving you a more precise feel in between gear changes. Get rid of that sloppy and less than direct feeling the Evo X has with this Delrin 2pc replacement kit.


-Reduced Shifter Play
-Improved 60fts / e.t's
-Self Lubricating
-Made out of lightweight Delrin
-Street and track torture tested
-Life Time Warranty
-Made in USA

[AWD Motorsports]

Bump

[rcantu]

i have their short shifter and shifter bushings. good stuff.

[Mike@AwdMotorsports]

Bump

[AWD Motorsports]

bump

[Mike@AwdMotorsports]

bump

[Mike@AwdMotorsports]

[Mike@AwdMotorsports]

bump

[AWD Motorsports]

bump

[jin]

PM'ed