FS: Carputer and Accesssories - Page 5 - EvoXForums.com

EvoXMRSleeper · 01-18-2013, 04:59 PM

Bump

Sent from my iPhone using AutoGuide.com App

EvoXMRSleeper · 01-21-2013, 12:26 AM

Bump

EvoXMRSleeper · 01-23-2013, 10:28 PM

Bump

Sent from AutoGuide.com App

EvoXMRSleeper · 02-09-2013, 06:53 PM

Bump

EvoXMRSleeper · 02-14-2013, 10:45 PM

Bump. Items separated for individual sell.

EvoXMRSleeper · 02-17-2013, 06:14 PM

Bump

1stEVO · 02-17-2013, 07:01 PM

I have been keeping my eye on this for a little while. Couple questions that I have:
-for the 12v power, would you need to have a surge protection or would you route this like you route this like an amp.
-I have an aftermarket amp already, so with having that this would be more plug and play? Could you take a picture of the back with all of the connections/ports?
-Is the carputer the same size in length?

EvoXMRSleeper · 02-17-2013, 07:24 PM

Quote:

Originally Posted by 1stEVO

I have been keeping my eye on this for a little while. Couple questions that I have:
-for the 12v power, would you need to have a surge protection or would you route this like you route this like an amp.
-I have an aftermarket amp already, so with having that this would be more plug and play? Could you take a picture of the back with all of the connections/ports?
-Is the carputer the same size in length?

1. The power supply consumes 160W max, so it should not require any additional capacitors. The processor chip is also only 35W, which was purchased due to it's low power consumption.

2. Attached above is a photo of the back of the radio. You would run a connection from the 3.5mm green outlet.

3. The motherboard, processor, power supply, and hard drive are mounted inside of the double din casing. It measures 8.5 inches in depth.

1stEVO · 02-17-2013, 07:49 PM

Thanks man!
ok dumb question possibly, powering, there are 3 wires. Obviously Red goes to positive, I would guess that black goes to ground, but white, would that also be ground? Or would you run black all the way to negative.
Also how do you think it will be with cooling or staying cool? I know my double din has a tiny fan in it. With it being a computer I would assume it is going be running even hotter.

EvoXMRSleeper · 02-17-2013, 07:56 PM

Quote:

Originally Posted by 1stEVO

Thanks man!
ok dumb question possibly, powering, there are 3 wires. Obviously Red goes to positive, I would guess that black goes to ground, but white, would that also be ground? Or would you run black all the way to negative.
Also how do you think it will be with cooling or staying cool? I know my double din has a tiny fan in it. With it being a computer I would assume it is going be running even hotter.

White goes to ignition. I would keep the ground as short as possible, so somewhere up near the center console.

I am not really sure with the cooling. I have not seen too many issues with the guys who have ran the computer in the dash. I have a small fan that could be mounted on the back plane if cooling became an issue.

01-18-2013, 04:59 PM	#41
EvoXMRSleeper Just Spooling Up Join Date: Jun 2010 iTrader: (100) Location: Orlando,FL Posts: 401	FS: Carputer and Accesssories Bump Sent from my iPhone using AutoGuide.com App __________________ Sponsored, built and tuned by Performance Race Solutions Built Motor with AMS 750r Turbo Kit MR to GSR tranny conversion completed! Carputer Sale

01-23-2013, 10:28 PM	#43
EvoXMRSleeper Just Spooling Up Join Date: Jun 2010 iTrader: (100) Location: Orlando,FL Posts: 401	FS: Carputer and Accesssories Bump Sent from AutoGuide.com App __________________ Sponsored, built and tuned by Performance Race Solutions Built Motor with AMS 750r Turbo Kit MR to GSR tranny conversion completed! Carputer Sale

02-09-2013, 06:53 PM	#44
EvoXMRSleeper Just Spooling Up Join Date: Jun 2010 iTrader: (100) Location: Orlando,FL Posts: 401	Bump __________________ Sponsored, built and tuned by Performance Race Solutions Built Motor with AMS 750r Turbo Kit MR to GSR tranny conversion completed! Carputer Sale Last edited by EvoXMRSleeper; 02-14-2013 at 10:45 PM. Reason: Items separated for sale.

02-14-2013, 10:45 PM	#45
EvoXMRSleeper Just Spooling Up Join Date: Jun 2010 iTrader: (100) Location: Orlando,FL Posts: 401	Bump. Items separated for individual sell. __________________ Sponsored, built and tuned by Performance Race Solutions Built Motor with AMS 750r Turbo Kit MR to GSR tranny conversion completed! Carputer Sale

02-17-2013, 07:01 PM	#47
1stEVO X-phile Join Date: Sep 2012 iTrader: (100) Location: Jacksonville, NC/Farmington, MN Posts: 685	I have been keeping my eye on this for a little while. Couple questions that I have: -for the 12v power, would you need to have a surge protection or would you route this like you route this like an amp. -I have an aftermarket amp already, so with having that this would be more plug and play? Could you take a picture of the back with all of the connections/ports? -Is the carputer the same size in length? __________________ 2008 Mitsubishi Lancer Evolution GSR w/ SSS I hooked up my accelerator pedal in my car to my brake lights. I hit the gas, people behind me stop, and I'm gone!

01-21-2013, 12:26 AM	#42
EvoXMRSleeper Just Spooling Up Join Date: Jun 2010 iTrader: (100) Location: Orlando,FL Posts: 401	Bump

02-17-2013, 06:14 PM	#46
EvoXMRSleeper Just Spooling Up Join Date: Jun 2010 iTrader: (100) Location: Orlando,FL Posts: 401	Bump

02-17-2013, 07:49 PM	#49
1stEVO X-phile Join Date: Sep 2012 iTrader: (100) Location: Jacksonville, NC/Farmington, MN Posts: 685	Thanks man! ok dumb question possibly, powering, there are 3 wires. Obviously Red goes to positive, I would guess that black goes to ground, but white, would that also be ground? Or would you run black all the way to negative. Also how do you think it will be with cooling or staying cool? I know my double din has a tiny fan in it. With it being a computer I would assume it is going be running even hotter. __________________ 2008 Mitsubishi Lancer Evolution GSR w/ SSS I hooked up my accelerator pedal in my car to my brake lights. I hit the gas, people behind me stop, and I'm gone!

Remove Advertisements Sponsored Links
Evo X Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO X CarPuter	SupremeX	'08+ Lancer Common Electronics & Audio	42	07-19-2012 02:56 PM
Carputer	danielskshin	Completed Transactions	18	05-19-2010 09:39 PM
for all the guys with the carputer G REMOTE !	sfdjflip	'08+ Lancer Common Electronics & Audio	1	09-27-2009 05:26 AM
Carputer .....	boy36	'08+ Lancer Common Electronics & Audio	8	01-07-2009 03:24 AM