Pistons? - EvoXForums.com

iceman23007 · 02-04-2013, 05:43 PM

What are the best pistons out for 2.0 motor build for a 08 X.

hollywood_X · 02-04-2013, 08:32 PM

JE Asymetrical or Arais would be my choices

KickAss · 02-04-2013, 08:51 PM

CP/Arias

toaster.evox · 02-04-2013, 09:08 PM

i've been looking at pistons my self think i settled on the JE Pistons Pro Series Forged. I found that some people hate them and some love them. some say they are noisy at cold start some don't.

Darksun280 · 02-04-2013, 09:22 PM

JE Asymetrical

Granted I'm not rocking them now but I will next motor I do.

Murlo26 · 02-04-2013, 09:43 PM

Are the AMS specced JE's the asymetrical ones? I don't even remember now haha. Anyway, I have the JE AMS spec ones, they work great, they are noisy on startup though until they warm up.

Darksun280 · 02-04-2013, 10:04 PM

Quote:

Originally Posted by Murlo26

they are noisy on startup though until they warm up.

because race car

cowtown_cowboy · 02-04-2013, 11:04 PM

Ross racing, just to be different.

Chris@MooreAutomotive · 02-05-2013, 01:45 AM

Ross, CP, Arias are my first choices

Kaizen Tuning · 02-05-2013, 02:42 PM

We have found Manley and CP to perform very well.

02-04-2013, 05:43 PM	#1
iceman23007 n00b Join Date: Jan 2010 iTrader: (0) Location: Fort Hood Tx Posts: 13	Pistons? What are the best pistons out for 2.0 motor build for a 08 X.

02-04-2013, 08:32 PM	#2
hollywood_X [E-Tuner] Join Date: Dec 2008 iTrader: (100) Location: Idaho bitch Posts: 8,889	JE Asymetrical or Arais would be my choices __________________ PM me if you're in need of an eTune www.PrecisionViolence.com https://www.facebook.com/pages/Preci...013389?fref=ts

02-04-2013, 09:08 PM	#4
toaster.evox X-phile Join Date: Aug 2011 iTrader: (0) Location: Richmond Va Posts: 710	i've been looking at pistons my self think i settled on the JE Pistons Pro Series Forged. I found that some people hate them and some love them. some say they are noisy at cold start some don't. __________________ RVA EVO X 11' GSR SSS/AERO Graphite Gray *********** Mod's AEM: CAI, UEGO Wideband Defi: Boost Gauge DSG: Forever Driven Gauge pod ETS: Recir DP, HFC, Upper & Lower ICP, 4" IC Agency Power: Ti-Tip Dual CBE TruboSmart: Dual Port BOV Grimspeed: 3-Port Walbro 255 ID 1000cc Tune: Moore Automotive Car/Bulid page http://www.facebook.com/pages/RVA-Evox/154912044605298 WTB Thread http://www.evoxforums.com/forums/showthread.php?t=62809

02-04-2013, 09:22 PM	#5
Darksun280 Forum Lackey Join Date: Sep 2010 iTrader: (100) Location: Long Island Posts: 2,103	JE Asymetrical Granted I'm not rocking them now but I will next motor I do. __________________ E-Spec Tuned\ E-Spec Built 2.0\ ETS DBB 6262 Turbo Kit\ Kelford 214B 605 whp 445 Tq @30psi 93 Octane Best E.T: 11.26 1.86 60ft Best trap: 129 Pump Gas Champ

02-04-2013, 09:43 PM	#6
Murlo26 Forum Addict Join Date: Jun 2009 iTrader: (100) Location: Minnesota Posts: 8,868	Are the AMS specced JE's the asymetrical ones? I don't even remember now haha. Anyway, I have the JE AMS spec ones, they work great, they are noisy on startup though until they warm up. __________________ MAP T4 TS 6266/ERL 2.2L 10:1 CR/E85 BakaUnchi Tuned

02-04-2013, 11:04 PM	#8
cowtown_cowboy Just Spooling Up Join Date: May 2011 iTrader: (100) Location: Toronto Posts: 186	Ross racing, just to be different.

02-05-2013, 01:45 AM	#9
Chris@MooreAutomotive [Elite Merchant] Join Date: Jan 2012 iTrader: (0) Location: Northern VA Posts: 215	Ross, CP, Arias are my first choices __________________ Chris Hoover Tuner/Master Technician Moore Automotive and Performance 9776 Fairfax Blvd Fairfax, VA 22031 703-352-3535 2008 Evo X GSR - Moore Auto Intake, UICP, LICP, TP, CBE, ETS 4" Intercooler, Pierburg 3-port - 364whp/388wtq@28psi - 2.4L build in progress... PM me about Dyno Tuning and E-Tunes - OpenSource and Cobb Pro-Tuner

02-05-2013, 02:42 PM	#10
Kaizen Tuning [Elite Merchant] Join Date: May 2010 iTrader: (100) Posts: 4,925	We have found Manley and CP to perform very well. __________________ Your Evo X Retailer for: HKS Pro Dealer and Installation Center See our reviews here: http://www.evoxforums.com/forums/showthread.php?t=46815 Proven Power: http://www.evoxforums.com/forums/showthread.php?t=57197 Sakura Performance Engineering http://www.evoxforums.com/forums/showthread.php?t=93578 Web Store https://www.kaizentuning.com/store/c...ra-performance

Remove Advertisements Sponsored Links
Evo X Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Pistons and Rods	Kooldino	Completed Transactions	3	05-27-2011 01:53 PM
Supertech Pistons	HR2L	Evo X Engine (4B11T)	7	04-26-2011 02:40 PM
Suggestions Rods and Pistons ?	vp900	Evo X Engine (4B11T)	84	01-07-2011 07:15 PM
90mm Pistons: Anyone?	hotdog	Evo X Engine (4B11T)	31	05-28-2010 11:37 PM