Mitsubishi Lancer Evolution Forum banner

MAPerformance *NEW* AEM 320LPH In-Tank Fuel Pump's - Get Yours Today For Only $99.98

17K views 128 replies 19 participants last post by  Maperformance 
#1 ·


AEM High Flow In-Tank Fuel Pump 50-1000



Current Sale Price $99.98 W/ FREE Shipping!


The AEM High Flow Fuel Pump flows 320 lph (84 gph) at 43 PSI and is capable of supporting over 1,000 HP at 43 PSI.*





The AEM High Flow Fuel Pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve.





AEM High Flow Fuel Pump Features
:
*Designed for high output naturally aspirated and forced induction EFI vehicles
*In tank design
*Tested to flow 320 lph @ 43 PSI
*39mm diameter fits most applications
*Offset inlet design eases installation
*
Every pump is tested to flow 320 lph at 43 PSI




*Power rating given at 43 PSI, 13.5v at the pump with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.


: Send us a PM|||||
: DrewAtMAP|||||
: 1-888-MAPERFORMANCE x 100|||||
: dreget@MAPerformance.com

|||||||||||||||

 
See less See more
19
#117 ·
This pump requires a pump hanger adapter that we offer (LINK) and slight clearencing of the bottom of the pump housing is required aswell but many people are successfully using this pump already. AEM is coming out with a direct drop in version of this pump but it wont be available for a few more months.
 
#123 ·
The AEM Pump comes with a fuel sock but since it requires a pump install kit which eliminates the intake fuel filter system we highly recommend adding an inline fuel filter such as our MAP Inline Fuel Filter --->LINK<--- The filter kit installs in 5 mins and adds a 40 micron fuel filter in the engine bay right before fuel enters the rail and is E85 safe aswell.
 
#127 · (Edited)
I'm looking into changing my Walbro 255lph fuel pump, does this AEM 320lph support 600whp on 93 octane pump gas? does it use the same install kit as the Walbro 255lph? and do I need the inline filter kit for it?
Gonna install a GTX3576R with ID 1300cc injector.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top