Shifter Extenders now available at TWM Performance!

[TWM Performance]

Until April 21st, get 10-15% off of a shift extender by signing up to the group buy thread at the following link!

http://www.evoxforums.com/forums/showthread.php?t=29701





Now available at TWM Performance, shifter extenders!

Brand new product available at TWM Performance are our 4” shifter extenders, made for different applications (Subaru, Honda, Mazda, Mitsubishi…) and engineered to accept both the factory shift knobs and aftermarket shift knobs.

TWM Performance shifter extenders are CNC machined in stainless steel.
Here is a picture of a 4” shifter extender installed on a Hyundai Elantra TWM short shifter, along with a stainless finish M1 Abrams shift knob:



Shifter extenders are the perfect addition for people who want to enjoy the precision and solidity of a short shifter, but keep the stock height, or even place the shift knob higher than stock. This is a great upgrade if you bring your car to the track for solo, lapping, auto-x or track racing. Less time spent between the steering wheel and the shifter = more time with both hands on the steering wheel. Combined with the throw of a short shifter and the extra mass of a weighted shift knob, this is the perfect combination for track days!

Extremely easy to install, our shifter extenders are available in the following thread sizes:

M10 x 1.5 (Honda/Acura)
M10 x 1.25 (Mazda, Hyundai, Mitsubishi, Nissan…)
M12 x 1.25 (Subaru, Toyota, Scion…)



If there is enough interest in our new shifter extenders, we’ll be looking at making them in different lengths as well as more finishes to match with our different shift knobs. The TWM Performance shifter extenders are available for $39.95 and also available in combo with any short shifters or any shift knobs.

You can place your order at the following link:

TWM shifter extenders


Thanks!

Frank
Team TWM Performance

[TWM Performance]

All pm's replied!

[TWM Performance]

The new TWM shifter extenders coupled with a TWM Short Shifter and TWM shift knob is becoming VERY popular! Get your orders in today!

[TWM Performance]

Here is a video we took at a local dragstrip in our 2008 Civic Si test car! The car has a TWM Stage 2 Full Replacement Short Shifter and our NEW 4 inch Shifter Extender!

You Tube

You Tube

[97laxlude]

The only thing that held me back from getting the twm short shifter was that it was quite a bit lower than the stock shifter. With the twm extender how much taller is it than stock? Also in that video the extender looks like it eliminates the throw length between shifts so with this extender on the X what's the shift reduction at? (15%, 20%, etc.)

Thanks

[TWM Performance]

Originally Posted by 97laxlude

The only thing that held me back from getting the twm short shifter was that it was quite a bit lower than the stock shifter. With the twm extender how much taller is it than stock? Also in that video the extender looks like it eliminates the throw length between shifts so with this extender on the X what's the shift reduction at? (15%, 20%, etc.)

Thanks

Hi laxlude,

The reduction in throw of the TWM Performance short shifter is 30%. However it's important to note that most of this reduction comes from the relocated pivot point below the shifter, and not the length of the shifter shaft. That being said, the distance that your hand must travel from 1st to 2nd (for example) will be increased with a shifter extender, but it will still remain less than stock.

I also want to point out that we will be introducing some new sizes (both shorter and taller) in the coming month, so keep an eye out for those

Patrick
Team TWM Performance

[TWM Performance]

Bump it up!

[TWM Performance]

Spring is here! Get your ride into summer mode with TWM Performance products!

[TWM Performance]

Don't forget to take advantage of the current group buy going on to get 15% off of a shifter extender, when you order a short shifter!

[TWM Performance]

Last day to get 15% off on the group buy!