AGP Cast Twin Scroll Turbo Kit - Page 3 - EvoXForums.com

wisniaPl · 03-07-2012, 10:34 AM

Quote:

Originally Posted by sstevojr

You guys are now caught up

This is the "small" one 2.8, then there are the 3.0 and 3.2
http://forums.evolutionm.net/evo-x-d...-8-505whp.html

Im past my hopes of 700 whp....on stock sleeves....after paying for 2nd build Im good with my fp black on e85

wisniaPl · 03-07-2012, 10:35 AM

Quote:

Originally Posted by newcomer81

if you look at the wg flange you can see that its divorced maintaining the twin scroll.

not to get to off topic but which other kit @ $3500 made that pass?

maybe little more but you can get ets TKit for under 4 k

newcomer81 · 03-07-2012, 10:58 AM

Quote:

Originally Posted by joey

Why meth dude?

Availability of e85 is limited. Only 2 pumps in the area and one is notorious for running out. If i have to travel any where i need a good backup

Quote:

Originally Posted by wisniaPl

maybe little more but you can get ets TKit for under 4 k

Ets's cheapest kit is $4600, twin scroll is $5400 although it comes with 2 ewg.

wisniaPl · 03-07-2012, 11:04 AM

Quote:

Originally Posted by newcomer81

Availability of e85 is limited. Only 2 pumps in the area and one is notorious for running out. If i have to travel any where i need a good backup

Ets's cheapest kit is $4600, twin scroll is $5400 although it comes with 2 ewg.

call them at tAlk to them

Jabby · 03-13-2012, 03:01 AM

so how were the results?

newcomer81 · 03-13-2012, 03:04 AM

kit sould arrive next week. I plan on putting the break in miles on the new block as fast as i can

discogodfather · 03-13-2012, 03:20 AM

3k for the whole kit? That's a steal. Doesn't look as sophisticated as the AMS design but I like the location of the WG for tuning access. Needs a heat shield or jacket.

Very very interesting.............

Where do you expect the Zeta to spool?

newcomer81 · 03-13-2012, 03:46 AM

Quote:

Originally Posted by discogodfather

3k for the whole kit? That's a steal. Doesn't look as sophisticated as the AMS design but I like the location of the WG for tuning access. Needs a heat shield or jacket.

Very very interesting.............

Where do you expect the Zeta to spool?

post 20 linked their kit on a stock everything x with their "smallest" zeta that made 500whp with full spool (31psi) at ~4250.
in comparison it is pretty much the same spool & power levels as what i was getting with all bolt ons when i was running an fp red. now that fp switched to all bb i would expect the red to spool a bit earlier than that but i did have more mods which may or may not effect the spool that i was seeing.

i'll be using a pt6266 cte so i will not be able to speak to the performance of a zeta directly but i know they have 9 other kits sold already. i am sure others will have picked it up as on option.

xezerax · 03-13-2012, 02:03 PM

Pm Ben for pricing I got a quote a lot cheaper than you guys are saying.. this thing really is a steal

newcomer81 · 03-13-2012, 02:20 PM

Quote:

Originally Posted by xezerax

Pm Ben for pricing I got a quote a lot cheaper than you guys are saying.. this thing really is a steal

i know he was/is offering exceptional pricing for the first kits to get some out on the market. you're right, i got mine very cheap but i didn't want to post those prices and set expectations so i was quoting his earlier estimates.

03-13-2012, 03:01 AM	#25
Jabby Just Spooling Up Join Date: Jun 2008 iTrader: (0) Location: San Antonio Posts: 539	so how were the results? __________________ Aem Meth Kit 50/50 AMS UICP AMS Intake & Heatshield AMS 02/Dp AMS Intercooler AMS Clutch Master Cylinder SpeedCircuit Testpipe & Wicked Edtion Exhaust Perrin EBCS 3port Synchronic Diverter Valve Exedy Triple HD Cobb AP Jacks built transmission Tuned by Cobb Tuning

03-13-2012, 03:04 AM	#26
newcomer81 Forum Lackey Join Date: Apr 2009 iTrader: (100) Location: Norfolk, VA Posts: 1,516	kit sould arrive next week. I plan on putting the break in miles on the new block as fast as i can __________________ BakaUnchi tune in progress

03-13-2012, 03:20 AM	#27
discogodfather X-phile Join Date: Jul 2011 iTrader: (100) Location: San Francisco, CA Posts: 1,103	3k for the whole kit? That's a steal. Doesn't look as sophisticated as the AMS design but I like the location of the WG for tuning access. Needs a heat shield or jacket. Very very interesting............. Where do you expect the Zeta to spool? __________________ 2008 MR 2001 Roush Mustang Stage 3 1973 Jensen Healey Racer (Lotus 907 race engine) 2001 Ducati 748 1969 BMW R60/2 1973 Norton Combat Commando 19XX Bobber ratrod, 96" S&S "The evo is more car to take me to my job in action mode have more space for my childrens have SST and brembo for my wife and recaro seat for me is the perfect family car in this time (is more balance) is evolution to the future the subi is the same line from the past in other boby for teneger. Evo dad car."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Full Race 4B11T T4 Twin Scroll & T3 Single Scroll Manifold Special!!	Full-Race Jon	Merchant Marketplace	39	10-26-2012 04:19 PM
FS: Agency Power Twin Scroll GT35r Turbo Kit!	kdiggz	Completed Transactions	7	04-10-2011 07:26 PM
Agency Power GT35R Twin Scroll Turbo Kit?	SYOGSR	Evo X Turbo	15	04-01-2011 09:57 PM
External WG on twin scroll turbos - are they still twin scroll?	Mojito	Evo X Turbo	5	05-01-2010 08:40 AM

03-13-2012, 02:03 PM	#29
xezerax Just Spooling Up Join Date: May 2011 iTrader: (100) Location: LI, NY Posts: 665	Pm Ben for pricing I got a quote a lot cheaper than you guys are saying.. this thing really is a steal

Remove Advertisements Sponsored Links
Evo X Forums Advertisement