Forever Driven A Pillars by DSG Performance - Third batch and counting! - Page 26 - EvoXForums.com

wwEvoXgsr · 01-17-2013, 01:18 AM

I want to install my gauges but not sure where to put them since it will be a while for the pillar. Any ideas?

Sean@DSG · 01-17-2013, 01:20 AM

Quote:

Originally Posted by wwEvoXgsr

I want to install my gauges but not sure where to put them since it will be a while for the pillar. Any ideas?

Toughy! A lot of guys use double sided tape to hold them for the short term .. I'd route and wire them so that they are prepped and ready for when the Pillar arrives and keep them up there somewhere. If you don't like the look, you can plug and un-plug them as needed say if you're getting a tune.

wwEvoXgsr · 01-17-2013, 01:25 AM

Quote:

Originally Posted by Sean@DSG

Toughy! A lot of guys use double sided tape to hold them for the short term .. I'd route and wire them so that they are prepped and ready for when the Pillar arrives and keep them up there somewhere. If you don't like the look, you can plug and un-plug them as needed say if you're getting a tune.

True. Maybe I'll tackle that this weekend.

DynastyX · 01-17-2013, 02:39 AM

Quote:

Originally Posted by wwEvoXgsr

I want to install my gauges but not sure where to put them since it will be a while for the pillar. Any ideas?

I taped mine down like this for the past few months. It's ugly but it works, all the wiring is routed to the pillar and out between the pillar and trim right below it... So when the pillar comes all I need to do is swap parts.

Looks like I just missed the first shipment, bummer. After all this time another week or so isn't going to kill me I guess. Can't wait to finally fix this eye sore that is my interior. It's embarrassing.

emiller · 01-17-2013, 08:15 AM

Quote:

Originally Posted by DynastyX

After all this time another week or so isn't going to kill me I guess. Can't wait to finally fix this eye sore that is my interior. It's embarrassing.

I know that feeling

Bezilla06 · 01-18-2013, 12:26 AM

Click image for larger version

Name: ImageUploadedByAutoguide1358472311.891729.jpg
Views: 186
Size: 193.0 KB
ID: 39402

Click image for larger version

Name: ImageUploadedByAutoguide1358472355.592506.jpg
Views: 182
Size: 163.8 KB
ID: 39410

here's my setup while I wait

Sent from my iPhone using AutoGuide.com App

EVOXNY · 01-21-2013, 09:58 PM

Any updates on if anything has shipped Sean?

Sean@DSG · 01-22-2013, 02:08 PM

As soon as I have tracking #'s, the first page will be updated as well as anyone who's had theirs ship will get an email. As per the last update the ones that have been released from QC were sent to packing which takes about a day or so - so I will have an update very soon on those as well as the status of the remaining units.

When I have updates, they'll be posted. If you don't see anything then there is nothing new to report.

RyanCB · 01-22-2013, 02:37 PM

So much for Mid-January

knifetheglitter · 01-23-2013, 11:19 PM

Ha. Yup

Sent from my SCH-I535 using AutoGuide.Com Free App

01-17-2013, 01:18 AM	#251
wwEvoXgsr Just Spooling Up Join Date: Nov 2012 iTrader: (0) Location: Miramar, FL Posts: 372	I want to install my gauges but not sure where to put them since it will be a while for the pillar. Any ideas? __________________

01-18-2013, 12:26 AM	#256
Bezilla06 Just Spooling Up Join Date: May 2012 iTrader: (100) Location: Philipsburg, PA Posts: 315	Forever Driven A Pillars by DSG Performance - Third batch and counting! here's my setup while I wait Sent from my iPhone using AutoGuide.com App

01-21-2013, 09:58 PM	#257
EVOXNY Member Join Date: Jul 2012 iTrader: (100) Location: Upstate NY Posts: 86	Any updates on if anything has shipped Sean? __________________ AMS WM DP AMS intake Synapse DV ETS TP AMS single exit CB AEM wideband Defi Boost Grimmspeed 3 Port APR vortex generator Perrin 2" Shorty Antenna Seibon CF fender vents Swift spec r springs Varrstoen 18x9.5 +12 w/ hancook ventus v12 265/35/18

01-22-2013, 02:08 PM	#258
Sean@DSG [Elite Merchant] Join Date: Aug 2009 iTrader: (100) Location: Canada, Montreal Posts: 5,118	As soon as I have tracking #'s, the first page will be updated as well as anyone who's had theirs ship will get an email. As per the last update the ones that have been released from QC were sent to packing which takes about a day or so - so I will have an update very soon on those as well as the status of the remaining units. When I have updates, they'll be posted. If you don't see anything then there is nothing new to report. __________________ -

01-23-2013, 11:19 PM	#260
knifetheglitter Forum Lackey Join Date: Jun 2009 iTrader: (100) Posts: 1,358	Re: Forever Driven A Pillars by DSG Performance - Third batch and counting! Ha. Yup Sent from my SCH-I535 using AutoGuide.Com Free App __________________ 2010 Evo X WW SE AMS Intake AMS Twin Tip Cat Back Exhaust AMS Resonated Test Pipe AMS Wide-mouth Down Pipe AMS FMIC AMS UICP SSP SST Cooler SSP Dual Catch Can Grimmspeed 3 Port Synapse Synchronic DV Cobb AP SSR Type-F Wheels: 18X9.5 +22 265 Star Specs w/ rolled rears AMS SS Brake Lines AEM Ugeo wideband AEM boost gauge AEM oil pressure gauge SE #93

01-22-2013, 02:37 PM	#259
RyanCB Just Spooling Up Join Date: Jun 2012 iTrader: (0) Posts: 114	So much for Mid-January

Remove Advertisements Sponsored Links
Evo X Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Who wants to win a guaranteed place on our Second Batch of A Pillars? Ya you do!	Sean@DSG	DSG Performance	37	01-31-2013 04:29 PM
This is it - The Second Batch & PRE-ORDER THREAD! Single, Dual and Triple A-Pillars	Sean@DSG	DSG Performance	677	09-27-2012 03:28 AM
DSG Performance "Forever Driven" Single Gauge Pod - NEW	SwissMtnAlien	Completed Transactions	4	09-18-2012 03:50 AM
Fujitsubo, Forever Driven (DSG), Synapse, Innovate and lot's more	skylineguv	For Sale (car parts)	5	09-02-2012 10:40 PM
80% of first batch of UK evos to have DSG style box	Kooldino	Evo X News	3	06-27-2007 04:08 AM