EcuFlash 1.44 - EvoXForums.com

Kooldino · 12-29-2012, 06:46 PM

Looks like it just came out yesterday. Anyone using it yet?

http://www.tactrix.com/index.php?opt...d=36&Itemid=58

nonschlont · 12-29-2012, 08:38 PM

just got a pop up saying theres an update. but havent updated yet...

chetrickerman · 12-29-2012, 08:41 PM

I am.

No issues yet

hollywood_X · 12-29-2012, 09:07 PM

Does it allow you to use USB 3.0 yet?

drkramm · 12-29-2012, 09:13 PM

im on it as well

nonschlont · 12-29-2012, 09:28 PM

just installed on my older laptop... seems ok so far, altho I havent connected to the car yet.

I was hoping the .xmls had been updated, since Golden has all da goodies on his site and updates often, as Rich is doing a fantastic job of finding/posting new maps...
Also, its back to inheriting an evo X base file, rather than Goldens all inclusive .xml

drkramm · 12-29-2012, 11:26 PM

I copied my old XML evo folder back over to the new folder

jasons9 · 12-30-2012, 03:27 AM

I only copied over the RAX xml's, and TephraXMOD-52680122 xml (used with the new provided xml's.)

I do see some updates in the new provided XML's (also the ACD xml's)

I'm pretty sure that got everything, seams to be working fine.

Beeble · 12-30-2012, 10:03 PM

it mentions something about Openport logging having a time stamp now?
which would be the only reason i upgrade....
can anyone comment on that? if it works i'll update my old laptop and throw the new firmware on the OP2.0

new drivers etc but i assume they are the same as the beta drivers i was already using.
so i'll stick with my trusty 1.43.3000 for now

TravisF · 12-31-2012, 04:21 AM

Weird things happening with the logging after the update ...

First off, zerotimecount = 1 doesn't work, there is an error written to the .out file and logging never starts.

I updated Ecuflash and the OP firmware and the logging worked fine the first time today. The timestamps on the files were still the old 1/1/2009 or whatever and never changed .

I just went out and did some more logs and this time the timestamps on all the files were correct with today's date and the times when they were started and stopped, but the data inside these logs are all wrong. It looks like the numbers were never scaled according to the scalingrpn formula.

12-29-2012, 06:46 PM	#1
Kooldino Dino [Administrator] [Approved Merchant] Join Date: Apr 2007 iTrader: (100) Location: South Jersey Posts: 21,174	EcuFlash 1.44 Looks like it just came out yesterday. Anyone using it yet? http://www.tactrix.com/index.php?opt...d=36&Itemid=58 __________________ Ball Bearing FP Black strapped to a SpeedCircuit 2.2L engine. Life is good. Like us on facebook - http://www.facebook.com/speedcircuit Firewall heat shield group buy!

12-29-2012, 08:38 PM	#2
nonschlont Just Spooling Up Join Date: Apr 2011 iTrader: (100) Location: SoCal Posts: 341	just got a pop up saying theres an update. but havent updated yet... __________________ KTM

12-29-2012, 08:41 PM	#3
chetrickerman [Music Mod] [FS Mod] [E-Tuner] Join Date: Dec 2008 iTrader: (100) Location: Colorado Springs Posts: 12,253	I am. No issues yet __________________ < 3000 lb Evo 10 w/ full tank Interested in Sakura Performance parts? shoot me a pm RIP mlomker PM me if you are interested in a E-Tune or Road tune

12-29-2012, 09:07 PM	#4
hollywood_X [E-Tuner] Join Date: Dec 2008 iTrader: (100) Location: Idaho bitch Posts: 8,869	Does it allow you to use USB 3.0 yet? __________________ PM me if you're in need of an eTune www.PrecisionViolence.com https://www.facebook.com/pages/Preci...013389?fref=ts

12-29-2012, 09:28 PM	#6
nonschlont Just Spooling Up Join Date: Apr 2011 iTrader: (100) Location: SoCal Posts: 341	just installed on my older laptop... seems ok so far, altho I havent connected to the car yet. I was hoping the .xmls had been updated, since Golden has all da goodies on his site and updates often, as Rich is doing a fantastic job of finding/posting new maps... Also, its back to inheriting an evo X base file, rather than Goldens all inclusive .xml __________________ KTM

12-29-2012, 09:13 PM	#5
drkramm Just Spooling Up Join Date: Apr 2012 iTrader: (0) Location: pa Posts: 529	im on it as well

12-29-2012, 11:26 PM	#7
drkramm Just Spooling Up Join Date: Apr 2012 iTrader: (0) Location: pa Posts: 529	I copied my old XML evo folder back over to the new folder

12-30-2012, 03:27 AM	#8
jasons9 Just Spooling Up Join Date: May 2009 iTrader: (100) Location: Calgary,AB Posts: 157	I only copied over the RAX xml's, and TephraXMOD-52680122 xml (used with the new provided xml's.) I do see some updates in the new provided XML's (also the ACD xml's) I'm pretty sure that got everything, seams to be working fine.

12-30-2012, 10:03 PM	#9
Beeble Forum Lackey Join Date: Jan 2010 iTrader: (0) Location: Melbourne, Australia Posts: 1,887	it mentions something about Openport logging having a time stamp now? which would be the only reason i upgrade.... can anyone comment on that? if it works i'll update my old laptop and throw the new firmware on the OP2.0 new drivers etc but i assume they are the same as the beta drivers i was already using. so i'll stick with my trusty 1.43.3000 for now __________________ X MR - MAP 2.2/GSC S2/mongrel GTX3576/FIC1100/ETS cooler/UR catback/Arogosta coilies/Whiteline sway Tuning help for your Evo or RA? PM me!

12-31-2012, 04:21 AM	#10
TravisF Just Spooling Up Join Date: May 2008 iTrader: (100) Posts: 225	Weird things happening with the logging after the update ... First off, zerotimecount = 1 doesn't work, there is an error written to the .out file and logging never starts. I updated Ecuflash and the OP firmware and the logging worked fine the first time today. The timestamps on the files were still the old 1/1/2009 or whatever and never changed . I just went out and did some more logs and this time the timestamps on all the files were correct with today's date and the times when they were started and stopped, but the data inside these logs are all wrong. It looks like the numbers were never scaled according to the scalingrpn formula.

Remove Advertisements Sponsored Links
Evo X Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ecuflash help.	Ralliart26	ECUFlash / OpenECU	0	11-07-2011 04:30 PM
HELP! ECUflash	Rik84	ECUFlash / OpenECU	26	01-20-2010 03:58 AM
ECUFLASH: Noob Questions Regarding ECUFLASH	Clipse3GT	ECUFlash / OpenECU	16	09-11-2009 04:02 PM
ecuflash	neng1987	ECUFlash / OpenECU	2	09-06-2009 11:03 PM
ECUFlash and ECUFlash Maps Subforums	verkion	Evoxforums.com - Site Suggestions and Help	3	02-09-2009 04:26 AM