ichiba v2 25mm spacers & CF center garnish - EvoXForums.com

rcantu · 01-02-2013, 03:10 AM

all sold!!!!!!!

Mr. Evo X · 01-02-2013, 03:39 AM

Did you have aftermarket wheels using the spacers?

rcantu · 01-02-2013, 03:44 AM

no i used stock gsr wheels but can fit any wheel. you may need to change the hubcentric rings though as aftermarket bores vary.

Mr. Evo X · 01-02-2013, 03:46 AM

Quote:

Originally Posted by rcantu

no i used stock gsr wheels but can fit any wheel. you may need to change the hubcentric rings though as aftermarket bores vary.

I'm rockin the stock wheels right now. My question is does the wheels rub on the outer fender or inner fenders? Any pic installed?

rcantu · 01-02-2013, 04:39 AM

the only pics i have was after i lowered it and already rolled the rear fenders and accidentally flared them.

from all the research i found is that 25mm makes the wheels flush with the fenders

pics here http://www.evoxforums.com/forums/sho...49&postcount=6

i did have some rubbing with the front inner lining but again i was lowered. heat gun took care of that.

rcantu · 01-10-2013, 03:20 AM

spacers gone

rcantu · 01-16-2013, 03:10 PM

bump for the garnish

rcantu · 01-28-2013, 03:51 PM

price reduced on the garnish to $150 shipped. I found a nice box to ship it in and it's ready to go!!!!

01-02-2013, 03:10 AM	#1
rcantu X-phile Join Date: Apr 2012 iTrader: (100) Location: orange county,ca Posts: 772	sold!!!!!!!! all sold!!!!!!! Attached Thumbnails Last edited by rcantu; 01-31-2013 at 10:59 PM.

01-02-2013, 03:39 AM	#2
Mr. Evo X Just Spooling Up Join Date: Jan 2012 iTrader: (100) Location: Allentown, PA Posts: 432	Did you have aftermarket wheels using the spacers? __________________ Turbo Trix UICP AGP Turbo CAI Borla Catback Perrin Down-Pipe with High-Flo Cat & Short Antenna SPEC Stage 2+ Clutch SSP Clutch Master Cylinder COBB AP BC Racing BR Coilovers DSG Performance A-Pillar Dual Gauge Pod Prosport Boost & Oil Pressure Gauge Torque Solution Short Shifter, Shifter Base Bushings & Gate Selector Pivot Bushings Sickspeed Oil Catch Cans

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Ichiba V.2 20mm wheel spacers (F&R)	EvoRN	For Sale (car parts)	6	02-16-2013 08:24 PM
Rally Armor Mudflaps & Ichiba v2 20mm Spacers	fractur3	For Sale (car parts)	14	01-11-2013 07:52 PM
Ichiba 25mm v2 hub-centric spacers	FL4TLINE	For Sale (car parts)	7	09-13-2012 10:41 AM
Rota Gforces 18x9 +30 w/tires & ichiba 15mm v2 spacers	FL4TLINE	For Sale (car parts)	22	09-05-2012 12:51 AM
WTB: 25mm spacers	celica2evo	Wanted to buy	1	06-14-2012 09:12 PM

01-02-2013, 03:44 AM	#3
rcantu X-phile Join Date: Apr 2012 iTrader: (100) Location: orange county,ca Posts: 772	no i used stock gsr wheels but can fit any wheel. you may need to change the hubcentric rings though as aftermarket bores vary.

01-02-2013, 04:39 AM	#5
rcantu X-phile Join Date: Apr 2012 iTrader: (100) Location: orange county,ca Posts: 772	the only pics i have was after i lowered it and already rolled the rear fenders and accidentally flared them. from all the research i found is that 25mm makes the wheels flush with the fenders pics here http://www.evoxforums.com/forums/sho...49&postcount=6 i did have some rubbing with the front inner lining but again i was lowered. heat gun took care of that.

01-10-2013, 03:20 AM	#6
rcantu X-phile Join Date: Apr 2012 iTrader: (100) Location: orange county,ca Posts: 772	spacers gone

01-16-2013, 03:10 PM	#7
rcantu X-phile Join Date: Apr 2012 iTrader: (100) Location: orange county,ca Posts: 772	bump for the garnish

01-28-2013, 03:51 PM	#8
rcantu X-phile Join Date: Apr 2012 iTrader: (100) Location: orange county,ca Posts: 772	price reduced on the garnish to $150 shipped. I found a nice box to ship it in and it's ready to go!!!!

Remove Advertisements Sponsored Links
Evo X Forums Advertisement