showevo08 build - EvoXForums.com

SHOWEVOX08 · 01-29-2013, 01:16 AM

Well i been waiting a long time for this two years now. Between deployment coming back blowing up and another year came and gone saving and buying everything right the first time around

I will answer the most asked question!

no i am not painting the doors or fenders

Power mods.

MAPerformance Stage 2 Stroker Shortblock 2.5L
Selected options:
Pistons: Wiseco(coated)
Connecting Rods: MAP Ultimate Duty X Beam
ARP Main Studs
Oil Pump: New OEM Included w/Installation
New OEM Block + Oil Squirters
Engine Gasket Set
ARP Head Studs
ACL THRUST WASHERS Mitsubishi 4B11T Main Bearing
RACE SERIES
ACL 4B1236H-STD ACL 08+ Mitsubishi 4B11T Evo X / Hyundai Genesis
Standard Size High Performance Rod Bearing Set
ACL 5M1237H-STD ACL RACE SERIES MAINS Mitsubishi 4B11T Thrust
Bearing RACE SERIES

maperformance build head
GSC (s2 & bhive)

Maperformance hotside T3 Kit
precision jb 6262
precision 45mm wastegate
FIC1100
Map 600hp fuel Kit
AMS UICP LICP FMIC CAI
ATP test pipe
Buschur True Catback Loud
HKS SSQV Blow-off
GS 3port
Mishimoto Radiator,/ hoses kit
Comp flywheel
FX400 custom
ssp catch can
bomba racing fuel rail
Cobb AP
ams motor mounts (cams side front and trans side)
ams cmc
upgraded timing chain/guides

Interior Mods

TWM SS and shift knob
AEM boost, a/f, oil temp/pressure
Rexpeed gauge pods
alpine single din and door speakers

Exterior Mods

Seibon CF doors front back, hood, trunk, rear diffuser, fenders
ITZ Black illusion body kit
Craft Square mirrors
Custom Paint Jaguar Radiant Red
PJDM Strut Bar

think that's everything lol things to come seats,roll cage,coilovers and new rims

SHOWEVOX08 · 01-29-2013, 01:17 AM

Pics to follow
before the failure

dom2.0 power that kills piston #1

piston 1 and oil pump

parts

SHOWEVOX08 · 01-29-2013, 01:17 AM

SHOWEVOX08 · 01-29-2013, 01:17 AM

dyno sheet on the big day

joey · 01-29-2013, 03:30 AM

Sub'd for awesomeness!

Demon X · 01-29-2013, 03:51 AM

Cant wait to see this done.

Chaz17 · 01-29-2013, 03:56 AM

Sub'd.

WootIHaveAnX · 01-29-2013, 05:04 AM

What caused the first failure man?

SHOWEVOX08 · 01-29-2013, 05:08 AM

Vacuum line on fuel rail came off...

SHOWEVOX08 · 02-04-2013, 10:31 PM

well cam caps are getting sent in today once i get my head back should be back together pretty quick

so excited and ready..

super excited to see what the maps t3 hotside kit with a 6262 puts out

01-29-2013, 01:17 AM	#2
SHOWEVOX08 Forum Lackey Join Date: Mar 2010 iTrader: (100) Location: Fort Richardson AK/ Jonestown PA Posts: 1,675	Pics to follow before the failure dom2.0 power that kills piston #1 piston 1 and oil pump parts __________________ map built (2.5L, head and hotside t3, Fuel kit), 6262JB, 45mm wg, ams (icp, cai, cmc, all motor mounts), ssqv, busher (tp, catback),GSC (s2 & bhive), TWM (SS, Knob), aem (oil, boost, air/fuel gauges), FIC1100, GS-3port, Mishimoto Radiator,red rad hoses, cobb AP, FX400c, comp flywheel, ssp catch can seibon CF (hood,trunk,wing,rear diffuser,doors, fenders), ITZ BODY KIT,craft square, df210, led kit, NRG 320mm/ 3.0 hub Goal 600whp Fs dom 2.0 PST ME Cheap..

01-29-2013, 01:17 AM	#3
SHOWEVOX08 Forum Lackey Join Date: Mar 2010 iTrader: (100) Location: Fort Richardson AK/ Jonestown PA Posts: 1,675	__________________ map built (2.5L, head and hotside t3, Fuel kit), 6262JB, 45mm wg, ams (icp, cai, cmc, all motor mounts), ssqv, busher (tp, catback),GSC (s2 & bhive), TWM (SS, Knob), aem (oil, boost, air/fuel gauges), FIC1100, GS-3port, Mishimoto Radiator,red rad hoses, cobb AP, FX400c, comp flywheel, ssp catch can seibon CF (hood,trunk,wing,rear diffuser,doors, fenders), ITZ BODY KIT,craft square, df210, led kit, NRG 320mm/ 3.0 hub Goal 600whp Fs dom 2.0 PST ME Cheap.. Last edited by SHOWEVOX08; 01-29-2013 at 01:21 AM.

01-29-2013, 01:17 AM	#4
SHOWEVOX08 Forum Lackey Join Date: Mar 2010 iTrader: (100) Location: Fort Richardson AK/ Jonestown PA Posts: 1,675	dyno sheet on the big day __________________ map built (2.5L, head and hotside t3, Fuel kit), 6262JB, 45mm wg, ams (icp, cai, cmc, all motor mounts), ssqv, busher (tp, catback),GSC (s2 & bhive), TWM (SS, Knob), aem (oil, boost, air/fuel gauges), FIC1100, GS-3port, Mishimoto Radiator,red rad hoses, cobb AP, FX400c, comp flywheel, ssp catch can seibon CF (hood,trunk,wing,rear diffuser,doors, fenders), ITZ BODY KIT,craft square, df210, led kit, NRG 320mm/ 3.0 hub Goal 600whp Fs dom 2.0 PST ME Cheap..

01-29-2013, 03:30 AM	#5
joey [Multi Mod] Join Date: May 2008 iTrader: (100) Location: The puckered butthole of America Posts: 22,558	Sub'd for awesomeness! __________________ Built and sponsored by SpeedCircuit Build thread Need quality parts for your Evo X? Click here! Need a tune? Click here!

01-29-2013, 03:51 AM	#6
Demon X [Local Team Member] aka JDAVID-EVO X Join Date: Jan 2010 iTrader: (100) Location: MA Posts: 15,960	Cant wait to see this done. __________________ E85PoweredWHPXXX Build Motor and AMS Turbo Kit Coming soon. Haters make me a better person. R.I.P M.LOMKER**

01-29-2013, 01:16 AM	#1
SHOWEVOX08 Forum Lackey Join Date: Mar 2010 iTrader: (100) Location: Fort Richardson AK/ Jonestown PA Posts: 1,675	showevo08 build Well i been waiting a long time for this two years now. Between deployment coming back blowing up and another year came and gone saving and buying everything right the first time around I will answer the most asked question! no i am not painting the doors or fenders Power mods. MAPerformance Stage 2 Stroker Shortblock 2.5L Selected options: Pistons: Wiseco(coated) Connecting Rods: MAP Ultimate Duty X Beam ARP Main Studs Oil Pump: New OEM Included w/Installation New OEM Block + Oil Squirters Engine Gasket Set ARP Head Studs ACL THRUST WASHERS Mitsubishi 4B11T Main Bearing RACE SERIES ACL 4B1236H-STD ACL 08+ Mitsubishi 4B11T Evo X / Hyundai Genesis Standard Size High Performance Rod Bearing Set ACL 5M1237H-STD ACL RACE SERIES MAINS Mitsubishi 4B11T Thrust Bearing RACE SERIES maperformance build head GSC (s2 & bhive) Maperformance hotside T3 Kit precision jb 6262 precision 45mm wastegate FIC1100 Map 600hp fuel Kit AMS UICP LICP FMIC CAI ATP test pipe Buschur True Catback Loud HKS SSQV Blow-off GS 3port Mishimoto Radiator,/ hoses kit Comp flywheel FX400 custom ssp catch can bomba racing fuel rail Cobb AP ams motor mounts (cams side front and trans side) ams cmc upgraded timing chain/guides Interior Mods TWM SS and shift knob AEM boost, a/f, oil temp/pressure Rexpeed gauge pods alpine single din and door speakers Exterior Mods Seibon CF doors front back, hood, trunk, rear diffuser, fenders ITZ Black illusion body kit Craft Square mirrors Custom Paint Jaguar Radiant Red PJDM Strut Bar think that's everything lol things to come seats,roll cage,coilovers and new rims __________________ map built (2.5L, head and hotside t3, Fuel kit), 6262JB, 45mm wg, ams (icp, cai, cmc, all motor mounts), ssqv, busher (tp, catback),GSC (s2 & bhive), TWM (SS, Knob), aem (oil, boost, air/fuel gauges), FIC1100, GS-3port, Mishimoto Radiator,red rad hoses, cobb AP, FX400c, comp flywheel, ssp catch can seibon CF (hood,trunk,wing,rear diffuser,doors, fenders), ITZ BODY KIT,craft square, df210, led kit, NRG 320mm/ 3.0 hub Goal 600whp Fs dom 2.0 PST ME Cheap.. Last edited by SHOWEVOX08; 01-29-2013 at 01:24 AM.

01-29-2013, 03:56 AM	#7
Chaz17 Forum Addict Join Date: Mar 2011 iTrader: (100) Posts: 6,691	Sub'd.

01-29-2013, 05:04 AM	#8
WootIHaveAnX X-phile Join Date: Nov 2012 iTrader: (0) Location: Denver, CO Posts: 1,088	What caused the first failure man? __________________ 2013 WW Evo X GSR - Purchased 1/30/13 AEM - BOOMBA - CP-E - ETS - FORTUNE AUTO - GRIMMSPEED - MAP - NITTO - OEM AERO - PERRIN - SYNAPSE - ULTIMATE RACING - WEDSSPORT 315whp/388wtq Uncorrected 91 Oct DynoJet #s @ 5,800ft Elevation 2004 ABP Acura RSX-S - Powered by an ERL 2.3L w/ a BB PT6766 CEA and PPG Straight Cut Gears Old GT35R Setup - 525whp 341wtq - 91 Oct @ 5,800ft Alt - 11.57 @ 123mph - Currently Rebuilding for E85 and Single Digit ETs

01-29-2013, 05:08 AM	#9
SHOWEVOX08 Forum Lackey Join Date: Mar 2010 iTrader: (100) Location: Fort Richardson AK/ Jonestown PA Posts: 1,675	Vacuum line on fuel rail came off... __________________ map built (2.5L, head and hotside t3, Fuel kit), 6262JB, 45mm wg, ams (icp, cai, cmc, all motor mounts), ssqv, busher (tp, catback),GSC (s2 & bhive), TWM (SS, Knob), aem (oil, boost, air/fuel gauges), FIC1100, GS-3port, Mishimoto Radiator,red rad hoses, cobb AP, FX400c, comp flywheel, ssp catch can seibon CF (hood,trunk,wing,rear diffuser,doors, fenders), ITZ BODY KIT,craft square, df210, led kit, NRG 320mm/ 3.0 hub Goal 600whp Fs dom 2.0 PST ME Cheap..

02-04-2013, 10:31 PM	#10
SHOWEVOX08 Forum Lackey Join Date: Mar 2010 iTrader: (100) Location: Fort Richardson AK/ Jonestown PA Posts: 1,675	well cam caps are getting sent in today once i get my head back should be back together pretty quick so excited and ready.. super excited to see what the maps t3 hotside kit with a 6262 puts out __________________ map built (2.5L, head and hotside t3, Fuel kit), 6262JB, 45mm wg, ams (icp, cai, cmc, all motor mounts), ssqv, busher (tp, catback),GSC (s2 & bhive), TWM (SS, Knob), aem (oil, boost, air/fuel gauges), FIC1100, GS-3port, Mishimoto Radiator,red rad hoses, cobb AP, FX400c, comp flywheel, ssp catch can seibon CF (hood,trunk,wing,rear diffuser,doors, fenders), ITZ BODY KIT,craft square, df210, led kit, NRG 320mm/ 3.0 hub Goal 600whp Fs dom 2.0 PST ME Cheap..

Remove Advertisements Sponsored Links
Evo X Forums Advertisement

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
lallen3's '08 CRM GSR build. aka: The 'Where did it all go wrong?' build.	lallen3	Evo X Build Journals	1343	10-26-2012 02:27 AM
Fiat to build Alfa Romeo SUV alongside Jeeps in America, build small car in Italy	testdummy	Automotive News, Articles & Pics	0	09-02-2011 01:10 PM
><> build (help me out)	fishstix	Evo X General	84	04-22-2010 02:25 PM
Help me build my MR	gmazloom	Evo X Tuning	11	09-22-2009 09:43 AM
My new build	EVOX2nv	Evo X General	5	02-12-2009 01:59 AM