|01-17-2019 08:20 PM|
But I still have mine. As long as you understand you are converting your car to a 2-seat vehicle then no issues.
Also haven't had any issues with the bar, though not sure how many issues a bar can give you. I like it, would recommend if you want one.
|12-12-2018 09:55 PM|
|08-23-2018 12:17 AM|
|StudioRSR_Ben||Do you still have the roll bar installed today?|
|03-11-2017 01:44 PM|
|micjester||Rear seat back will fit fine. Just take a snips and cut the wire backing out of the corners where it meets the bar. Then cut a bit of foam with a knife, and it bends right around the bar.|
|02-26-2017 04:37 AM|
|Silverton||Just to reply: I like the Ryan Gates concept of having a roll bar/cage with the OEM rear seats. No passengers, but looks nice and is quieter. If I could buy the 311RS roll bar/cage, I would.|
|12-02-2015 09:41 PM|
It is possible to do, you will have issues with the the upper section of rear seat by the side bolsters. You can force them around the roll bar but they will stick out quite a bit. The roll bar makes the back seat unusable both from a practical sense and even more from a safety sense. The space gets shrunken down so much that getting an individual back there becomes extremely difficult, they have to be a contortionist to get in and out. The main problem lies in their safety, the bars are positioned where if there is a sudden stop, the rear seat occupant has no where to go but smack into one of the cross bars.
|12-02-2015 06:19 PM|
|KickAss||If you plan on having people on the back seat, please do them a favor and don't install the bar unless it's removable for when you want people sitting there. It's a serious safety hazard involving head injury.|
|11-17-2015 03:07 AM|
Another alternative is the Beatrush rear bulkhead divider.
it fits nicely and provides a barrier from the trunk while allowing you to get rid of the seatbelts+ heavy braces for the rear seat.
The downside is that it provides less noise reduction, so you will hear the road a lot more as the trunk has no sound insulation.
|11-16-2015 01:24 AM|
|Silverton||Seriously looking at this roll bar. Can the rear seat and seat back be replaced once the roll bar is installed?|
|04-07-2014 04:28 PM|
|Highgain10||Good link Iowa, my sources weren't showing grade 8 he he. Man, grabbing the front edge of a skid plate at speed would be evil. Got my bar painted over the weekend, should have it installed by the end of the week.|
|This thread has more than 10 replies. Click here to review the whole thread.|