Evo x to evo 8 diff swap
So I've completed the swap and used a evo 8 rear diff with DSS axles for the conversion. QUESTION- do any of you guys that completed the swap and have the DSS axels have any play with the axles from the shaft moving in and out of the diff holes on both sides? Like I legit can pull my axles out about a 1/2 to 3/4s of an inch. Keep in mind that this happens with the axle nut still in place and torqued down. My car makes like a certain clicking noise when taking off in first gear (not launching). Thank you guys in advance.
Sounds like you got the wrong axles.
They should be ralliart length/spec
|All times are GMT. The time now is 08:59 AM.|
Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.