Mitsubishi Lancer Evolution Forum banner

My REAL LED Headlight Installed :-)

9K views 28 replies 14 participants last post by  Redbeast 
#1 · (Edited)
I decided to take a different approach from what everyone else is doing, i wanted something more modern than all the other EVO X headlights.








LMK what you guys think.
Thanks!
 
See less See more
4
#7 · (Edited)
Everything fits almost like it was made to be installed in the EVO X lights. All you need is some patience and epoxy 3m glues.
Im trying now to locate everything again for the passengers side.


You cant tell the color temperature from the pic. Its not comparable to the stock color. Its whiter.

Look at the right concrete wall and left concrete wall at the garage door.
The left side is considerably brighter and also whiter.
Driving at night i cant believe how much more light is on the drivers side.
 
#10 ·
I found online some specs for these lights.

2016 ACURA MDX Jewel Led Lights 5500K Output Color

47W total power draw (combined I assume, ~24W each side?)

Uses 5 LED diodes, 3X behind projectors for low beam, 2X under a reflector housing to High Beam.

Multi LED/LightPipe DRL below the 5 Jewel Eyes LightPipe LED Turn Signal (Super Bright)
10,000hr+ Life Expectancy
 
#19 ·
Looks good, i remember seeing this one a evo 9 last year. Cool to see it on a x
 
#24 ·
You have to play with all the wires to find out which is which.
Ground the black wire then touch the power to individual wires on the driver unit to see what lights up what. Then I labeled everything.
I used a fully charged car battery with a low amp fuse just Incase I burn something.
The mdx has three settings.
Its really really easy to find them.
GL!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top