Mitsubishi Lancer Evolution Forum banner

Cflo23 2015 EVO X MR Build

38K views 108 replies 27 participants last post by  Daniell73 
#1 Ā· (Edited)
Purchased my 15 STI brand new in 2014

Did a Stage 3 + FF Power Package on this STI

Always wanted an EVO MR so in Dec. of 2016 put the STI back to stock and traded it in for an 15 EVO MR.

Found a great deal on a 3.5 ETS intercooler, didn't care for the white stencil, so I sent the intercooler off to get anodized all black for a cleaner look.

Installed Buschur Racing Cross Flow Exhaust and Carbon Fiber Exhaust Shields

Installed Recaro's

Installed OEM Side Markers, OEM GSR Hood Vents and freshly powdercoated Rims

Installed an Alpine Reverse Camera in the Non-Navi Headunit

Installed ETS 3.5 Front Mount and ETS Upper and Lower piping.




Up to speed how she currently looks, I've had this car for 5 months now and this is the longest duration of not tinting my windows on any of my vehicles.


Dyno Dynamics:ā€Ø
E85 310hp/315tq
ā€ØDynojet:ā€Ø
E85 356hp/362tq

Modifications / Accessories:

Suspension

*Swift Spec R Springs [not installed]

Brakes
-Girodisc Front & Rear Slotted 2pc Rotors
-Girodisc Front & Rear Magic Pads (street)
-Girodisc Front & Rear S/S Brake Pads (track)
-AMS Stainless Steel Brake Lines
-ClubSpec Master Cylinder Brace
-Motul RBF600 fluid

Wheels/Tires
-Stock BBS EVO X MR Wheels Powder Coated Bronze Chrome
- JDM Final Edition BBS Center Caps
-Michelin Pilot Sport 4S
-Gorilla Automotive Mag Style Lug Nuts Black
-Chasing Jā€™s Titanium valve stem cap

Exterior
-RPlate Digital License Plate | REVIVER
-Rexpeed Carbon Fiber Exhaust Shields
-Alpine Reverse Camera
-APR Formula GT3 Mirrors with JD Customs USA Titanium Hardware
-Carbonetics OEM Nose Chop
-Carbonetics OEM Grille Surround
-Carbonetics OEM JDM RS Foglight Deletes
-Carbonetics OEM Hood Vent
-Carbonetics OEM Door Handles
-SuperBrightLeds LED DRL Bulbs
-SuperBrightLeds LED Front Sidemarker
-Bimmian Stealth Turn Signal Bulbs Ultimate Concealment
-Smoked Lens Sequential Amber LED Side Markers

Interior
-Odyssey Extreme AGM PC680 170 CCA
-STM Small Battery Tie Down
-Antigravity Battery Tracker AG - BTR - 2
-Innovate Motorsports ECB-1 gauge
-Ortiz Single Pod Trim painted to match OEM Black trim
-BlendMount
-Escort MAX 360c
-Escort M1 Dash Cam
-Escort in-dash power cord
-Gentex 313 Homelink Mirror
-OEM Full Leather Recaroā€™s
-OEM Aluminum E-Brake Handle
-TGS Red Ignition Switch
-TGS Air Conditioner Adjuster Ring Set
-COBB Red Shift Knob
-COBB WeatherTech FloorLiners
-Midd Town Co. Red Quick Release Fire Extinguisher Mount Kit
-Kidde Auto/Marine White Extinguisher
-Door Striker and Hinge Covers

Engine
-ETS 3.5 Intercooler Anodized Black
-ETS Upper and Lower Intercooler Piping Wrinkle Black
-ETS Intake Stock MAF Housing Wrinkle Black
-ETS Race Test Pipe
-MAPerformance O2 Eliminator Downpipe Glacier Black High Temp Ceramic Coating
-MAPerformance Cam Angle Sensor Heat Shield Wrinkle Black
-Buschur Racing S.S. Cross Flow Catback Exhaust
*ETS Quiet Exhaust V3 [spare setup]
-Injector Dyanmics ID1050X
-Walbro 450LPH E85
-Torque Solution Fuel Pump Holder
-Radium PTFE Fuel Tubing
-Radium E85 Fuel Sock
-Radium High Flow Fuel Filter 6 Micron Microglass
-Radium 10AN ORB to 6AN Male (x2)
-Radium 5/16in SAE Female to 6AN Male (x2)
-Radium 6AN Coupler, Female to Female, 90 degree
-Radium PTFE Hose 6AN - 11.4 - ST - 90
-Radium Dual Catch Can Kit
-Radium PushLok Hose End 8AN ST
-Radium PushLok Hose End 8AN 45 degree
-Radium PushLok Hose End 8AN 90 degree
-Radium 1/8NPT Male to 3/16in Barb 90 degree
-Evil Energy Male Flare to1/8in NPT Pipe Fitting Adapter
-Radium Alternate Mount for Crankcase Kit
-Radium Petcock Drain Kit
-Vibrant Performance Line Separator
-Driven Fab E85 Flex Fuel conversion kit with Radium SAE Quick Connect adapter fittings
-KT Motoring E85 Flex Fuel wiring harness
-WTF FPR Silicone Hose with spring clamps
-COBB 3-Port Boost Control Solenoid
-TiAL QRJ Bypass Valve
-Turbosmart 4mm silicone vacuum hoses
-OEM Orange Relay Replacement Package
-Chasing Jā€™s Titanium coil pack cover
-Chasing Jā€™s Titanium oil cap
-Chasing Jā€™s Oil Dip Stick
-Chasing Jā€™s Radiator Cap
-Project Mu Brake Master Cylinder Cap
-ClubSpec NRG Ops MIVEC Extender (wire tuck PnP)
-ClubSpec Power Steering Reservoir Cover
-ProSport Carbon Fiber Hood Dampers
-Carbonetics OEM Fuse Box Cover
-Carbonetics OEM Battery Terminal
-Carbonetics OEM Relay Cover

Tuning
-ProTune @KT Motoring Tuned by Phil
-EvoScan SST TCU Mod Rom V3
 
See less See more
12
#2 Ā·
wow... that was one clean STi! But you did the right thing coming to our side hahaha. ive had too many friends have standard Subaru issues and switch over to evo and never been happier with their decision. Clean build so far and some sweet seats!
 
#5 Ā·
Thanks for the kind words gentleman. I would like keep this car clean, to me less is more.



I was able to successfully install a aftermarket reverse camera to my non navi oem head unit utilizing this harness:
Axxess AX-MITSUCAM-6V Mitsubishi Backup Camera Retain/Add-On 14-up
https://www.amazon.com/Axxess-AX-MITSUCAM-6V-Mitsubishi-Backup-Camera/dp/B01MQH96KP

Installed LED DRL Bulbs from super bright leds, they were literally plug and play (no need for repining etc.)
1156 LED Bulb - 27 SMD LED Tower - BA15S Retrofit
https://www.superbrightleds.com/moreinfo/daytime-running-light-bulb/1156-led-bulb-27-smd-led-tower-ba15s-retrofit/2622/


I won a Cobb SF Intake + Airbox giveaway on the other Evo X Forum. Also installed Cobb 3 Port Boost Control Solenoid, Cobb Turbo Inlet, Cobb Downpipe, and Cobb Catted Test Pipe.



Picked up a Set of H&R springs on GSR Struts that I couldn't pass up, haven't decided if I'm going to install them anytime soon.

Also have AEM e85 fuel pump and ETS intake, just need to piece some more parts before I can get a protune with 5150 or RRE.

For the meantime I going to run a RRE Rick Barcena etune for my Cobb Stage 3 parts currently installed.
 
#13 Ā·
I actually had issues with the Russel Quick connect fittings and I didn't want to bend my fin/lip on the stock hard line to fully seat the quick connect.

Example:

So I upgraded to Radium SAE Quick Connect male fittings ultra-low profile.

20-0290 5/16in SAE Female to 6AN Male, Low Profile

Thanks to @Cyp for confirming you don't have to bend the fin/lip on the the stock hard line.

Final product all Radium pieces now except for Russel Fuel Filter.




 
#17 Ā·
Installed Bimmian Stealth Turn Signal Bulbs Ultimate Concealment, no more egg-yolk turn signals.

Before:


After:
 
#18 Ā·
#25 Ā· (Edited)
Mitsubishi, sure was cheap with the 2015 Evo X.

Replaced these cheap plastic stickers, with actual rubber plugs from the stealership.

It's in the details.

 
#30 Ā· (Edited)
Thanks, Ortiz Custom Pod painted to match OEM trim.




First time I saw door hinge covers, so cool.
You need to drive more!!
Once I get my ProTune, I will drive it more. Looking at end of this month or middle of April.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top