Mitsubishi Lancer Evolution Forum banner

UICP - Upper Intercooler pipe $90.00

61K views 305 replies 13 participants last post by  Tim@Depo Racing 
#1 · (Edited)
DEPO RACING www.deporacing.us

2.5" OEM Gt bolt clamps includesrade Aluminum (2mm wall thickness) UICP, 4 ply silicone cou
pers and 4

OEM Grade (2mm) is 3 times thicker than what many other companies use, yet is still very light. There are to many posts of guys crushing the pipes with t-bolt clamps, If you crush the pipe you are reducing the flow of air and it defeats the whole purpose. Also I did not make the pipe that connects to the intercooler. There is nothing wrong with it, I would have just duplicated it anyway like all the others. I chose to keep costs down and focus on performance only.

Elbow Section can purchased separately on website

T-bolts and couplers included
 

Attachments

See less See more
2
#4 ·
Tim I have both the UICP and the UICP elbow in my cart. I've also added five t-bolt clamps. However the coupler that connects to the turbo is smaller diameter on one side. Will I just reuse the worm drive hose clamp or do you offer a smaller size for it?

Thanks! Kris
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top