COBB v403 Maps for 2008-2010 Evo X GSR and MR - EvoXForums.com - Mitsubishi Lancer Evolution X Forums
EvoXForums.com - Mitsubishi Lancer Evolution X Forums
Go Back   EvoXForums.com - Mitsubishi Lancer Evolution X Forums > Evo X > Evo X Tuning > Cobb AccessPort
Home Register Forum Store Members List Calendar Auto Loans vBGarage Photo Gallery Search Today's Posts Mark Forums Read Auto EscrowInsurance

Cobb AccessPort Subforum for discussion about AccessPort software and tuning.

Reply
 
Thread Tools Display Modes
Old 10-31-2013, 10:59 PM   #1
COBB Tuning
[Elite Merchant]
 
COBB Tuning's Avatar
 
Join Date: Jul 2009
iTrader: (0)
Location: Austin, DFW, Portland, SoCal
Posts: 919
COBB v403 Maps for 2008-2010 Evo X GSR and MR

Hey guys! As you've seen in our other thread, we've been updating the calibration files for the Evo X. We have carried the improvements learned with the 2011-2014 cars into these maps in hopes of offering a complete host of maps for all USDM Evo Xs.

Thorough testing has been done in-house on multiple vehicles however before pushing these maps to full release we would like to hear your feedback. Please feel free to submit datalogs and ask any questions you have. We’ll do our best to answer your questions and make any changes to the calibrations that are deemed necessary.

Make sure your Accessport firmware is up to date using Accessport Manager,and the maps should then be on your device. You can also download the OTS maps off of the maps section of the COBB Tuning website.

NOTE: V403 Maps have been moved to full release and can be downloaded off of the COBB Tuning website.

As always, thank you for your continued support!

COBB Mitsubishi Team
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


MITSUBISHI EXPERT GROUP
-
CHRIS BLACK | DREW GORRIE | CHARLES KAHLE | KYLE FLOWERS


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by COBB Tuning; 01-06-2014 at 02:38 PM.
COBB Tuning is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 11-05-2013, 05:04 PM   #2
blackbyrd
Just Spooling Up
 
blackbyrd's Avatar
 
Join Date: Oct 2010
iTrader: (0)
Location: -76.281956, -112.107468
Posts: 319
Tried out the v403 "stage 3" map today on my 2010 MR, and I still have erratic idle issues. In fact I think it's worse. It was a really high idle around 950rpms usually, and it would bounce around from around 850 to 1000 at times.
__________________
Ps = (1.5 x 6 x .75) / {(4/3) (pi) [(31.039 x 10^15) (46.5 x 10^9)]^3}
Seems like a waste..
blackbyrd is offline   Reply With Quote Quick reply to this message
Old 11-10-2013, 10:16 PM   #3
Optiblue
X-phile
 
Join Date: May 2009
iTrader: (100)
Location: Vancouver
Posts: 1,138
I would try them, but I'm running the injen intake and catless. Guess no plans to add support for non Cobb products anymore eh?
__________________
'08 MR --> '10 GSR
Optiblue is offline   Reply With Quote Quick reply to this message
 
Old 11-10-2013, 10:57 PM   #4
SD_EVO
Just Spooling Up
 
Join Date: Jul 2013
iTrader: (0)
Posts: 401
Quote:
Originally Posted by blackbyrd View Post
Tried out the v403 "stage 3" map today on my 2010 MR, and I still have erratic idle issues. In fact I think it's worse. It was a really high idle around 950rpms usually, and it would bounce around from around 850 to 1000 at times.
Same thing. High idle around 900-1k rpms and would still bounce a little but not as much. 2014 stage 2 LWG
SD_EVO is offline   Reply With Quote Quick reply to this message
Old 11-13-2013, 06:56 AM   #5
knifetheglitter
Forum Lackey
 
knifetheglitter's Avatar
 
Join Date: Jun 2009
iTrader: (100)
Posts: 1,489
i would love to try these, but i need support for the AMS intake.
__________________
2010 Evo X WW SE
AMS Intake
AMS Twin Tip Cat Back Exhaust
AMS Resonated Test Pipe
AMS Wide-mouth Down Pipe
AMS FMIC
AMS UICP
SSP SST Cooler
SSP Dual Catch Can
Grimmspeed 3 Port
Cobb AP
SSR Type-F Wheels: 18X9.5 +22
265 Star Specs w/ rolled rears
AMS SS Brake Lines
SE #93
knifetheglitter is offline   Reply With Quote Quick reply to this message
Old 11-14-2013, 06:28 PM   #6
COBB Tuning
[Elite Merchant]
 
COBB Tuning's Avatar
 
Join Date: Jul 2009
iTrader: (0)
Location: Austin, DFW, Portland, SoCal
Posts: 919
Wanted to let you guys know that we will be working on putting together a document that will have the correct MAF scaling for different brand intakes. This will allow you to copy the values and make those changes in ATR.

-Eric
__________________

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


MITSUBISHI EXPERT GROUP
-
CHRIS BLACK | DREW GORRIE | CHARLES KAHLE | KYLE FLOWERS


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
COBB Tuning is offline   Reply With Quote Quick reply to this message
Old 11-14-2013, 07:09 PM   #7
ElementX
aka MitsuEvoX
 
ElementX's Avatar
 
Join Date: Jun 2011
iTrader: (100)
Location: Pearl Harbor, HI
Posts: 1,000
I got kinda excited for a minute, then remembered I am 90% done with my EF3 swap. Lol
__________________
08 GG GSR
MAP:EF3//Injen:Intake//TurboXs:TBE//AGP:3.5" FMIC:UICP:LICP//ID:1000//DW65C// Spec 3+//RA Flaps//TWM:Short Shifter//Redline Goods


ElementX is offline   Reply With Quote Quick reply to this message
Old 11-14-2013, 07:37 PM   #8
knifetheglitter
Forum Lackey
 
knifetheglitter's Avatar
 
Join Date: Jun 2009
iTrader: (100)
Posts: 1,489
Im pumped

Sent from AutoGuide.com Free App
__________________
2010 Evo X WW SE
AMS Intake
AMS Twin Tip Cat Back Exhaust
AMS Resonated Test Pipe
AMS Wide-mouth Down Pipe
AMS FMIC
AMS UICP
SSP SST Cooler
SSP Dual Catch Can
Grimmspeed 3 Port
Cobb AP
SSR Type-F Wheels: 18X9.5 +22
265 Star Specs w/ rolled rears
AMS SS Brake Lines
SE #93
knifetheglitter is offline   Reply With Quote Quick reply to this message
Old 11-18-2013, 05:58 AM   #9
-rrd-
n00b
 
Join Date: May 2012
iTrader: (0)
Location: houston, tx
Posts: 26
tried out the stage 3 v403 map on my 2008 gsr

mods: cobb sf intake, cobb turbo inlet, cobb 3port, turboback exhaust

i've been running the v400 stage 2 + cbcs map for a while now, seems to be the only one that runs stable for me

tried this one out, definitely had high idle bouncing between 1000-1100 rpm, seemed a little high, boost was sporadic, on a back road i opened it up and saw 30psi pop up on my boost gauge for a second and was like nope! flashed the LWG version and then boost felt really sluggish, only getting to low 20's (21-22psi) and still felt weird

anyway i'm back on the v400 map for now
-rrd- is offline   Reply With Quote Quick reply to this message
Old 11-18-2013, 04:19 PM   #10
timmiii
Member
 
timmiii's Avatar
 
Join Date: Jul 2010
iTrader: (0)
Location: NJ, NYC, MI
Posts: 75
The v403 maps have fixed my idle issues however, I'm a bit concerned with the method used to fix the random knock issue.

I noticed that the knock detection tables were made less sensitive during stop then go acceleration. Is this safe? I used to see counts up to 16 but now it shows 1 or 0 everywhere. All of the knock occurred in very low load conditions according to my AP.
timmiii is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the EvoXForums.com - Mitsubishi Lancer Evolution X Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Security Question
While balancing on a piece of wood, two inches by four inches known as a 2x4, john and his friend sally both spotted a dalmatian inside a truck with sirens, headed to put out a fire. State what the 2x4 is made of.
Insurance
Please select your insurance company (Optional)

Log-in


Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
COBB v402 OTS Maps for 2011-2014 Evo X GSR and MR COBB Tuning Cobb AccessPort 190 02-08-2014 08:26 PM
2008 Evo X GSR roms flashable on 2010 Evo X GSR? infinite3k ECUFlash / OpenECU 5 04-08-2011 02:37 PM
F.S.- Cobb Accessport for 2008 Evo X GSR Dwreck Completed Transactions 10 08-23-2010 06:08 PM
Buying a New 2008 EVO X GSR in 2010 Keshav707 Evo X General 123 07-13-2010 09:48 PM
WTB WW EVO X GSR 2008 or 2010 PHILLYPA Completed Transactions 0 02-27-2010 09:41 PM


All times are GMT. The time now is 02:34 PM.



Powered by vBulletin® Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.