Mitsubishi Lancer Evolution Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. '08+ Lancer Common General
    I make my lancer 4b11 turbo have Evo x turbin I want to know how many psi hold my lancer stock?
  2. Evo X General
    Hey gang. A few years ago, I had the engine in my 2011 Evo X rebuilt. I was warned about the piston slap I would hear from cold starts as I opted for forged pistons in the rebuild. I will concede, the slap it is terrifying when the engine is cold, cold, ie; anything less than 10 C / 50 F, but...
  3. '08+ Lancer General
    Hi! Im really curious if it's possible to have forged pistons, rods, springs, and maybe camshaft(all custom made) for my 4b11 NA 2.0L manual transmission engine, I have decent amount of budget for the upgrade, just wasn't sure if it can handle like atleast 450 to 500hp and atleast 350lbs+ of...
  4. Evo X Engine (4B11T)
    I have a very quiet knocking coming from the engine at idle in my 4b11 which I assume is due to the cheap 91 gas in my town. When the throttle is pressed from idle at 750 rpm or so, there is a super brief louder knock which is unmistakably fuel knock, but the knocking does not occur at any other...
  5. Evo X General
    Hello all! So I figured now would be a good time to introduce myself and start a discussion on my next project I was wanting to modernize the mitsubishi starion /dodge conquest drivetrain and after a little bit of research I decided to try and workout the issues with converting the 4b11...
  6. '08+ Lancer Common General
    Hello, everyone. My name's Renzo and I'm new here. I tried looking for a post on this before doing my own, so sorry if it already existed. I bought a new, 2010 Mitsubishi Lancer GT on May 26, 2011. It's the Latin American version of the GTS, no sunroof and a 4B11 (2.0L) engine. The car's been...
  7. Evo X Build Journals
    Hi guys, I decided to do a new thread since the other one got watered down quite a bit, kinda went off topic. Let me start off by saying we never ever assemble a motor without first checking the clearances. Any machine shop can throw something together for you send it off to the...
1-7 of 7 Results
Top