Mitsubishi Lancer Evolution Forum banner
ecu
1-13 of 14 Results
  1. Evo X General
    Hello guys! Old Evo veteran returning here! I have recently bought a 2013 Evo GSR from a auction in Iowa! Super clean car but had a very small fire in the engine bay. I since than pulled old engine and old upper chassis harness And replaced them both. When trying to start the car I get a bunch...
  2. For Sale (car parts)
    ECU / ECM for Evo x GSR for sale. I bought off of mitsubishipartsusa.com for $980 brand new and didn't need it. Check part number with existing ECU for exact replacement 1860c045.
  3. Evo X Tuning
    Okay so I'm having issues with my 2008 evo x. I'm going to be trying a new ECU but i wanted to clarify first. In order to use a different ECU i will need my laptop, MUT3, and a VCI correct? I'm just not 100% sure if my laptop can be the VCI or if I need both. Thank you in advance!
  4. Evo X General
    Video of car trying to start I have a 2011 evo x, it cranks but does not start. Back story I fried my ecu trying to flash and the cobb got stuck in the middle of the tune and killed my ecu, so I bought a new ecu got it bench flashed with my tune put on it, got my vin coded on it with a mut3...
  5. Evo X Performance
    Looking for recommendations as the cheap aliexpress obd2 cable won’t work at all. I’m located in Europe so I would prefer buying from an EU company, thanks. I drive a 2011 Evo X GSR (European domestic market) at 81.000km right now
  6. Wanted to buy
    Need a evo x valve body text me at 720-243-7046 need one used or new in working condition.
  7. Evo X Tuning
    Hi guys, My car's ECU is disconnecting only under acceleration and that not even consistently, 4 out of 5 pulls all seems fine but on the 5th the ECU just dies and throws a p0606 code. I'm really frustrated as the entire wiring loom has been taken apart and no visible issues show there. And it...
  8. Evo X General
    I have a 2008 EVO X GSR unfortunately the ECU is fried so I purchased a used working 2013 EVO X GSR ECU I have the car at a dealer right now(I dont have a MUT III laying around) one of the techs said he couldn't program the ECU, so he said for me to wait until tomorrow so he can ask the other...
  9. Evo X Tuning
    hey guys. I have recently got a new macbook pro and am trying to install evoscan and ecuflash so i can start to look around and figure out how to tune. Problem is.. 1. It looks like evoscan does not support Mac (not sure all the threads and info i have come upon are fairly old) 2. I thought i...
  10. Evo X General
    Okay, a friend of mine is a factory trained Evo X Master Technician, and here is the gospel regarding cobb AP's, tunes and warranty. PLEASE NOTE: the info in this thread is only as it relates specifically to Evo X warranty, the access dealers have to ECU information, and how the warranty...
  11. Evo X Transmission & S-AWC System
    Hi, I'm wondering if anyone on this forum has experienced this and can help me out with this problem I am having. I live in Calgary, and recently my ACD pump broke because of the cold weather, I took my car into Platinum to get it replaced because it is still under warranty. After they replaced...
  12. Evo X General
    Hi, this is my first post here, though I've used this forum for alot of info in the past year. I recently flashed Cobb Stage 2 to my 2010 EVO MR-T after putting on Perrin's TBE. This was this past weekend and everything seemed to be running fine. I took some logs and everything looked normal...
  13. Evo X Tuning
    Hey Guys, I'm looking to get some tuning done on my Evo X MR but i don't really know where to take it. I've heard Harvey aka BoostCreep is really good here in CO. He tuned my buddies WRX not too long ago and he did a great job but I was wondering if any of you guys have had any of your Evo's...
1-13 of 14 Results
Top