Mitsubishi Lancer Evolution Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. ECUFlash / OpenECU
    Hello all and thank you in advance. I recently installed an upgraded fuel pump, ID1050X injectors, and AMS fuel rail with Russell inline filter. I've got the injector scaling pretty much dialed in at this point but I'm having a hard time not overthinking the latency tuning process. Basically...
  2. ECUFlash / OpenECU
    Hello, I'm running the TephraModV3 rom and I've noticed quite a bit of intermittent knock on WOT. Just hoping someone can help point me in the right direction for how to adjust my maps to correct this. Still pretty new to tuning but I am an ASE certified tech for Toyota (went with the money) so...
  3. Evo X Tuning
    So i just recently purchased evoscan and i was able to download it but when it asks me for my email and serial key it gives me a message that says "invalid serial for this version". I'm pretty sure the serial is a 5 digit number right? I have tried the lost serial options on the evoscan website...
  4. Evo X Tuning
    Okay so I'm having issues with my 2008 evo x. I'm going to be trying a new ECU but i wanted to clarify first. In order to use a different ECU i will need my laptop, MUT3, and a VCI correct? I'm just not 100% sure if my laptop can be the VCI or if I need both. Thank you in advance!
  5. Evo X General
    Hi guys, i already apologize for the wall text but i don't want to miss any detail. I hope someone can help me. I just performed a complete teach-in on my Evo X MR 2009 (Europe) 47k miles because i think it has never been done and the car sometimes was driving with only 2nd-4th-6th gear. First...
  6. '08+ Lancer General
    My car is a Chinese version of the Lancer Ex, use EvoScan record Log, found no Lancer Ex option. So I tested all modes, only a OBD-II mode and EVOX MUTIII mode can read the correct portion of log data, but can not be read OBD-II mode knock, and Load data EVOX MUTIII mode read out is wrong. how...
  7. Evo X Tuning
    Is there such a thing as map sharing? It seems to me many people have the same mods, if not, very similar. Now, I know each car is a little different, but I figured if people shared maps, then one would at least have a base map to small tweaks for their specific ride. Anyone know if such a...
  8. Cobb AccessPort
    So I'm thinking of ditching my Cobb AP and going EvoScan Tactrix. Long story with Cobb service in Plano, but I do have some questions first. I do have the ATR and a Protune, I am upgrading my turbo to an EF3 and want to know if there are some write-ups on using the ATR on something like this...
  9. Evo X Tuning
    hey guys. I have recently got a new macbook pro and am trying to install evoscan and ecuflash so i can start to look around and figure out how to tune. Problem is.. 1. It looks like evoscan does not support Mac (not sure all the threads and info i have come upon are fairly old) 2. I thought i...
  10. ECUFlash / OpenECU
    those are the steps i am taking but it just don't have my type/year ecu to choose from so i can write on it.and this i s a clipse tune and i know he is busy that is why i will contact him if no one has a clue. thanks guys.the second picrure is from when i go to reflash ECU tab.
  11. ECUFlash / OpenECU
    Installed EvoScan 2.9 today. Pros: -Better interface -Can clear out your fuel trims for you (no more manually resetting the battery!!!) -Has more data items to log Cons: -Seems to be kind of a pain about changing the logging directory (sometimes it defaults back - this may be an admin rights...
  12. Evo X Tuning
    When I try to pull up my datalogs into Virtual Dyno i get an error message saying my TPS was not full throttle. I know they don't open full throttle because they are electronic. So how do I bypass this in the Virtual Dyno?:wtfsign:
  13. Evo X Tuning
    i am trying to log the MAF Volts for a GCC (Middle East) spec Evo MR. Rom ID 53050009. my understanding is that the MAF Volts should be between 0-5 volts? the evoscan request address for Mode23 MAF Volts (23808f47) is logging something not correct! 0.35 v for the idle and 0.95 v max on Loads...
1-13 of 13 Results
Top