Installing Mivec deletes intake and exhaust on my built 4b11 running AMS cams. Anyone know if the cam gears can be installed straight out the box onto the cams or do I have to adjust them before installing them. Also when installed, can the car be driven up and down the street to check for any...
Hey guys. I have a 2014 Evo X GSR. I've been trying to find some info on a test pipe install with the Borla exhaust. I know the Borla exhaust is 2.75" and the test pipe I want to install is 3". Will they bolt right up to one another or will I need some special adapter or gasket? I appreciate...
Just wondering if i can install my UICP and Intake without a tune, ive been hearing different things, some people say install it right before getting a tune others say its safe to install without a tune? i just need to know i dont want my car idealing weird and messing up
This is directed at those who are installing a OE fitment fuel pump such as dw65, aem, cnt and the like. The stock pump housing prefilter or sock clip assembly on the bottom that holds the sock in place also has a part that hold a bypass valve shut. If you are doing away with the stock sock and...
From now until December 31st, 2013 - SpeedCircuit will install your clutch and flywheel for $850! Restrictions apply.
Parts and fluids are not included in the price.
Price is for Evo X and Ralliart only.
All parts and fluids must be purchased through SpeedCircuit, LLC...
I was wondering if anyone here could give suggestions to any custom muffler shops, aftermarket installations, part painters, in or around potomac/Rockville, md, or montgomery county or just around the DMV in general, reputability and cost would be key factors.
I have a EvoX MR, I purchased the eibach pro-kit which is just the springs. My question is do i need different bump stops or anything else so the shock doesent blow? How hard is it to match the alignment?
please help, Thank you.
Okay guys so I got the strut out and put the spring compressors on but I cannot get the top bolt holding everything together off. It's the single nut holding the top of the strut together.
It's the last piece standing between me and being done with this strut. But I can't get the bitch off...
Installed this front tow hook on my friends MR today...much simpler than drilling into the front of the crash beam route.
We used a 3/8" spacer to get the hook below the plastic bumper cover. Also had to cut out a slot for the tow hook to feed through the grille mesh and plastic air deflector...
Hey guys I will be receiving my h&r coilovers from Perrin Friday, and wondering if anyone in the area would give me a hand with installing them. My old mans gotta garage here with a lift so it shouldnt be a huge hassle. Would end up being a fun time, I'll supply the pizza and beer :rock:
hey guys, i got a 2011 ralliart and i just bought a new magnaflow catback i need installed.
im located in northern jersey and i was wondering if anyone knows a good place that could install it well and for a good price. any info is appreciated, thanks guys.
also, if you have any how-tos on how...
Ok I think I got the parts list for my first mod:
SSP EVO X MR FRONT MOUNT TRANS COOLER
Ecuflash/tactrix 2.0 cable
AMS High-flow Cat
Bosch 4.2 Wideband sensor
What's my next step?
Do I order the parts and ask a local shop to install?
Do I go to a local shop and ask them for...