Mitsubishi Lancer Evolution Forum banner
scaling
1-5 of 5 Results
  1. Evo X Tuning
    Never had the pleasure of tuning FIC 900s before, and I couldn't find any scaling numbers on the forums. So based off of the spec sheet that they came with, here's what I'm starting with in ECUFlash: Voltage - Dead Time 6.011730205278592 - 2.775 7.991202346041056 - 2.13 9.970674486803519 -...
  2. ECUFlash / OpenECU
    So since my MAF was never scaled properly, I put in my stock injectors, changed my injector scaling numbers back to stock, did some logging and used a tool I found in another thread to scale my MAF. Once my fuel trims were close to 0 I figured that should mean my MAF is properly scaled. Well...
  3. ECUFlash / OpenECU
    Lately I've been scaling a lot of MAFs, primarily in cars that have upgraded fuel pumps and FPRs. I've spent a TON of time getting them dialed in correctly, and being the anal bastard that I am, I tend not to call it "good enough" until I'm near zero. If you're not familiar with MAF scaling...
  4. Evo X Tuning
    Does anyone have any base numbers for HKS 800cc injectors?
  5. Evo X Tuning
    So as engine builds are becoming more popular for the X, I think it's time we discussed tuning for larger displacement motors (bored and/or stroked 4B11Ts). I'm currently working on tuning a 2.2L engine that we built for DaemonSadi. Once it got up to full temp, the idle would get really lopey...
1-5 of 5 Results
Top