Mitsubishi Lancer Evolution Forum banner
torque
1-4 of 5 Results
  1. Evo X Performance
    So, as we are all aware, the X rear diff is much "weaker" than the mechanical 8/9 diffs found in the stateside/RS EVO. My question, has anyone taken a AYC capable differential from an international Evo and swapped it into the X? The idea here is that I would like to keep the spirit and...
  2. Evo X Engine (4B11T)
    Is anyone running higher than manufacturer recommended specs on ARP head studs? For the 4B11T ARP says to go hand tight then use 3 incremental steps of 30 / 60 / 90 ft/lbs. On the 4g63 people are running 100+ for high boost applications with great results. I was just wondering if anyone here...
  3. Evo X Performance
    Having fun with my new, 2010 Evo X GSR in stealth-look graphite grey. But naturally, I'm thinking about more power in the near future. I'm curious to hear your opinions on two, general options. 1) Turbo upgrade. 2) Displacement upgrade. 1) Turbo upgrade. AMS and Cobb tuning both have a really...
  4. 5-Speed Manual (W5M6A)
    Pulled the trans out of my evo, and went to get my flywheel turned. They couldn't turn it since it was warped. I checked it with a straightedge, and it was 10 thou warped towards the center of the mating surface. Awesome. Fortunately I had an extra one from Joey. Turns out that's warped as...
1-4 of 5 Results
Top