Mitsubishi Lancer Evolution Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
205 Posts
Discussion Starter #1
Selling my brand new still sealed in the package BALL BEARING FP Green turbo with high psi WG and oil filter.
I bought it brand new from Ivey Tune, Sean got it from FP to use in my build. My plans changed, I’m going bigger!!

I want $1949 firm picked up or $2049 firm shipped.
I’m Willing to drive 50 mile radius from NYC area to meet.
I paid over $2500
My loss is your gain!
PayPal ready.
Thanks!
 

Attachments

·
Registered
Joined
·
205 Posts
Discussion Starter #7 (Edited)
Bump I have connections ?

I bought it brand new from Ivey tune, then my EVO went down and my plans changed.

Price is $1800 shipped

Still sealed in clear FP plastic and FP tape.
My EVO is down for 1.5 years it doesn’t look like I’m gonna install this turbo.

MY HUGE LOSS IS YOUR GAIN!!
 

·
Registered
Joined
·
205 Posts
Discussion Starter #9
Im going to keep an eye on this one.

Is it an anti-surge housing like it should be?

Yes and more!!

Also Buscher Racing sells this upgrade for $2500
Mine is brand new!!!

From BR SITE-
Forced Performance is proud to announce the debut of our 100% brand new, patent pending, dual ceramic ball bearing design within the FP GREEN™️ Turbocharger for the Lancer Evolution X vehicles. This new design virtually eliminates any limit to allowable thrust load within the turbocharger while simultaneously reducing drag and rotational resistance to spool up. The increased thrust limit significantly extends the longevity of the turbocharger when operated beyond its published flow and boost limits and eliminates the turbochargers sensitivity to lubrication interruptions due to hard acceleration and cornering forces. Recent performance testing at the MHI Research and Development Laboratories in Nagasaki, Japan verified that the design dramatically exceeds the normal allowable thrust loads for TD05/6 type turbochargers and allows for a significant increase in the available airflow from the turbocharger without bearing damage.
Internally very little is shared with any previously offered turbocharger anywhere in the world beyond the description of "ball bearing". This patent pending design is 100% blank page and will have an important impact on turbocharger bearing systems for years to come. The races and ceramic balls of the turbocharger are the highest grade components available anywhere, period.
This unit features the 54lb/min 73mm HTA™️ compressor wheel and a new 65mm revision of the high efficiency 67mm turbine wheel used in the FP RED™️ for the Evolution X Turbocharger for the perfect combination of power and rapid spool.


The FP GREEN™️ for the Evolution X also comes standard with our huge 3" inlet elbow and surge ported compressor housing.


This turbo is covered by our 12 month complimentary repair service. You must activate this service within 30 days of purchasing this turbocharger by returning the registration card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, dis-assembly of the turbocharger or running an external wastegate will exclude the turbo from complimentary repair service.
This turbo comes with FP oil line kit, a $200.00 value.
 

·
Registered
Joined
·
884 Posts
Yes and more!!

Also Buscher Racing sells this upgrade for $2500
Mine is brand new!!!

From BR SITE-
Forced Performance is proud to announce the debut of our 100% brand new, patent pending, dual ceramic ball bearing design within the FP GREEN™️ Turbocharger for the Lancer Evolution X vehicles. This new design virtually eliminates any limit to allowable thrust load within the turbocharger while simultaneously reducing drag and rotational resistance to spool up. The increased thrust limit significantly extends the longevity of the turbocharger when operated beyond its published flow and boost limits and eliminates the turbochargers sensitivity to lubrication interruptions due to hard acceleration and cornering forces. Recent performance testing at the MHI Research and Development Laboratories in Nagasaki, Japan verified that the design dramatically exceeds the normal allowable thrust loads for TD05/6 type turbochargers and allows for a significant increase in the available airflow from the turbocharger without bearing damage.
Internally very little is shared with any previously offered turbocharger anywhere in the world beyond the description of "ball bearing". This patent pending design is 100% blank page and will have an important impact on turbocharger bearing systems for years to come. The races and ceramic balls of the turbocharger are the highest grade components available anywhere, period.
This unit features the 54lb/min 73mm HTA™️ compressor wheel and a new 65mm revision of the high efficiency 67mm turbine wheel used in the FP RED™️ for the Evolution X Turbocharger for the perfect combination of power and rapid spool.


The FP GREEN™️ for the Evolution X also comes standard with our huge 3" inlet elbow and surge ported compressor housing.


This turbo is covered by our 12 month complimentary repair service. You must activate this service within 30 days of purchasing this turbocharger by returning the registration card included with the turbocharger and a copy of your receipt if purchased from a supplier other than Forced Performance. Please contact us directly if you have any problems or questions regarding your turbocharger, dis-assembly of the turbocharger or running an external wastegate will exclude the turbo from complimentary repair service.
This turbo comes with FP oil line kit, a $200.00 value.
Shit. This is a pretty dope turbo.

Looking for trades? LMAO
 
1 - 11 of 11 Posts
Top