Mitsubishi Lancer Evolution Forum banner

Advice needed on AVC-R

890 Views 1 Reply 2 Participants Last post by  TheBlade
Can anyone advice y is my boost n rpm reading on my avc-r not accurate? Its able to control boost fine but the readings are not.

The boost when idle is -20mm. Only when full boost then its accurate.

The rpm reads at 100+ and rises till 900 max.
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.