Mitsubishi Lancer Evolution Forum banner

Aem Tru Boost Setup

1452 Views 0 Replies 1 Participant Last post by  my12secevo
We installed the AEM TRU BOOST, and are having a conflict with some of the suggested % Duty and Spr crack pressure from the forum.
Currently running K&N cone filter.
Our AEM EBC is set to 47% Duty and 8.0 crack pressure. 23 PSI peak - 16.5PSI
This was trial and error in 2nd and 3rd pulls.
We tried some suggested 58% duty with 12.0 crack pressure, and had 25+ PSI PEAK, and got the CEL in 5th that some others got.
BOTTOM LINE is in curreny setup with K&N Id like to be running a steady and safe 24PSI PEAK and 18.5-19 PSI steady. Any suggestion what are we doing wrong etc.
In the future we will add Agency Power full Exhaust, AP Intake, AP hard pipe.
If anyone can shead light on this topic, your help is appreciated so thank you in advance.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.