Mitsubishi Lancer Evolution Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hi Forum,

I blew my turbo to exhaust manifold gasket.



I am running a CBRD BBX Turbo , on my Evo X 2014 GSR Race Car.
I converted the joint from studs to bolts , and I think the bolts I used were not really good ! so that is why the gasket was blown !


Can anyone recommend a good replacement turbo gasket , and a set of studs or bolts for the joint.

Thanks !
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #5 ·
Thanks for your help everyone ! I am going to use oem bolts and gasket and safetywire the bolts, if it goes again I will use some of the recomended stuff !

Thanks again !
 

·
Registered
Joined
·
19 Posts
Discussion Starter · #10 ·
Thank you for the information , I will keep you updated on the results of the repair douring next race.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top