Mitsubishi Lancer Evolution Forum banner

Boost Load Offset and Boost Target Engine Load

4352 Views 6 Replies 4 Participants Last post by  Golden
Ok so my offset is 47 and my target load is 86 at WOT, which sums to 133. I'm hitting ~26psi of boost though, so someone explain this to me, since everywhere I have read it seems to indicate that a total load (offset + target) of like 280+ would hit 26psi not 133. Does a 3port make these numbers basically meaningless and you have to work from the ground up?
1 - 1 of 7 Posts
I know this has been covered but just so I'm sure, you guys use psi based because it's easier and no one tunes so on the edge that you'll blow your motor with another 20 or 10 WTQ?
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.