[MarioB]

I've seen threads that say camber is not adjustable on the back of stock Ralliart, but I couldn't find anything about the front. Is that adjustable?

Related to that, does anybody have recommendations on the right camber ajustments for a Ralliart (stock) to improve autocross perfomance?

Thanks!

 

[bravozero]

The rear camber can't really be adjusted on the stock setup. You would need a rear camber kit for the Lancer, Whiteline KCA329. I have it installed on my RA, gives me +/- 0.5 degrees of adjustment. That's your best bet, and pair it with a set of coilovers so you can adjust the fronts as well.

 

[Skyline Fever]

You can take the 2 bolts that hold the strut to the steering knuckle, widen the two bolt holes with a grinding tool, and take the car to a mechanic for wheel alignment. Be sure to ask the mechanic to set the camber angle you specify, otherwise he will just set camber to OEM specs.

If you don't want to do that, you can buy camber adjustment bolts.

 

[MrAWD]

Does anyone know if the EVOX camber/crash bolts for the front end would work on Ralliart models?

Fedja

 

[Skyline Fever]

Does anyone know if the EVOX camber/crash bolts for the front end would work on Ralliart models?

Fedja

I'm not sure if the EVOX ones will work........
But since there are only 4 or 5 different types of crash bolts, getting the right ones isn't going to be hard.