Mitsubishi Lancer Evolution Forum banner
1 - 20 of 70 Posts

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #1 · (Edited)
Just wanted to post up about my recent build that I have started. Ive owned the car for three years now and after my recent deployment to Asscrackistan, I finally have the funds to do a full build on the car.

Engine:
2.2L overbore
Arias 90mm 10:1 HC Pistons with Coated Skirts and Heads
Pauter Rods
Golden Eagle Sleeves
Cossie 90mm Head Gasket
ARP Main Studs
ARP Rod Studs
ACL Race Bearings

Head:
AMS TMP Cams
BC +1mm Valves
Supertech Dual Valve Springs
Kelford Titanium Retainers
Ported & Polished

Turbo Setup:
ETS T4 Top Mount Hot Parts Kit
Tial MVR Gates
BorgWarner S300SX FMW 64mm

Transmission:
Welded Diff Pins
Possibly the Tomioka 4.19 Final Drive setup
Carbonetics Twin / Triple Clutch

Fuel Setup:
Wally 450 E85 Version
ID 2000s
Boomba Fuel Rail

The block is being assembled by NukeRJ and the head is being assembled Simsahh.

Im shooting for roughly 600 to 650whp corrected on a local Mustang Dyno.
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #2 ·
Reserved
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #3 ·
Saved
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #4 ·
Mine
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #5 ·
Pictures
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #7 ·
looks nice btw make sure u got about 8-10k saved up for a back up plan... just in case somthing fails
like what happened to me
Haha of course. I have confidence in my builder and tuner. My car is in good hands. :D
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #9 ·
That really sucks. Sorry to hear about your bad luck!
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #11 · (Edited)
I wouldn't recommend the dual valve springs. That's what I have and it has been such a pain in the ass the whole time.
In what way? Ive got plenty of buddies running the dual valve springs with no problems.
 

·
Registered
Joined
·
254 Posts
uh... believe me ... i thought i was in good hands and everything and everything went south not even really 5 pulls it was gone :eek:
Dude you just broke his heart. Lol
 

·
Registered
Joined
·
2,725 Posts
Discussion Starter · #17 ·

·
Banned
Joined
·
4,280 Posts
I thought so too, till I talked to full-race. Honestly, its a 67mm that spools like a 35R.

I don't think Dino is running yet but he has a 9180 on a 2.2 so spool characteristics should be similar to yours.

You are going to make more than your goal, by a long shot. I think your build looks pretty stout, excited to see this coke together!

The 8374 and 9180 have the same case size. If the 9180 is too big you can always swap for an 8374 later on.


Sent from AutoGuide.com App
 

·
Registered
Joined
·
1,416 Posts
I thought the 91 was along the same lines as the HTA37, my bad. Build looks good nonetheless man. When is it gonna be done? I'm trying to get leave so I can visit CO at the end if June. I miss the X so fucking much.


Sent from AutoGuide.com Free App
 
1 - 20 of 70 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top