Mitsubishi Lancer Evolution Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
625 Posts
Discussion Starter · #1 · (Edited)
Staying with the 2.0. Being that there's no E85 close, I plan on running 93 + meth. Here's my list of parts I need. Feel free to suggest anything I may have overlooked or forgotten.

Fuel - Buschur DP, Map AFPR ,AMS fuel rail , probably FIC 2150 (unless I can find out for sure if the 1650's replaced the 1680s)

MAP ultimate duty rods
JE pistons
ACL main and rod bearings
Arp head and main studs
Engine gasket set
Probably the AMS 900 kit.

Am I missing any necessary upgrades? Also I already have MX1's and springs.
 

·
Registered
Joined
·
42 Posts
I would say you need Darton sleeves based on your turbo selection.
 

·
Vendor
Joined
·
543 Posts
And if you're going with Darton sleeves you might as well overbore for some additional displacement :) We would love to help you out with your project (if we aren't already)
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top