Mitsubishi Lancer Evolution Forum banner

EVO product development / coilovers

1421 Views 12 Replies 10 Participants Last post by  DaFastOne
Hey all.

We are currently undergoing development of or next line of products. Im look for some help from you guys here. For this batch of product we are aiming to fine tune our suspenions to specific applications, one of which is the evo. We plan on using your feedback to put together a couple tests to feature on

Heres what im thinking,wWe want to soften our spring or possably go progressive in our blue line while going lower ride heights accross the board. Also trying to figure out how stiff to go on the street/ track and our track specific product lines.

What im looking for is this.

Street guys: what kinda of ride heighs you run. wheels sizes, what kinds of spring you using now (spring rate would be awsome if u know em) and you feeling on the setup and ways you would improve it.

Track guys: pretty much the same thing. if you tracking you car i would assume you know you spring rates....lets talk...

where were at now its we have extremely similar spring rates to cetrain green bodies and orange bodied competitors. but we know that you cant get anywhere by sitting us out here ppl, this is your chance.

1 - 1 of 13 Posts
Cannot advertise without vendor status!
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.