Mitsubishi Lancer Evolution Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
469 Posts
Discussion Starter · #1 ·
Hey all i am trying to tune my grimmspeed 3port ebc right now and i was just wondering what the mechanical limits of the stock evo x turbo is? I am getting about 25 psi till about 5500 rpms then it tapers down to 20-21 psi by redline. is that just the limit of the turbo?

mods are
turbo back exhaust
no cat
intake
hardpipe
grimmspeed ebc
cobb AP
 

· Registered
Joined
·
14,255 Posts
No. ^
 

· Registered
Joined
·
1,490 Posts
oh, sorry comments were on youtube itself
:08 pressure crosses 25psi and you can begin to hear it leak.
:15 pressure gets to 28psi and leak becomes very audible
:18 pressure increased to 30psi and it leaks really bad
:32 pressure reduced to 25psi leak decreases but still there
:40 had to drop pressure down to 20psi for the leak to stop completely


two points to take away from it; 1) stock bov leaks above ~25psi 2)it will continue to leak until you drop to ~20

so if you spike higher than 25 you'll be bleeding off pressure the whole way to redline making it even harder for the stock turbo to keep up
this was at sealevel ~75 deg iirc
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top