Mitsubishi Lancer Evolution Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
Hello All.
As a lock down project, I have written a new piece of software that is useful for Evo X owners !

The new program is called "EVO X TOOLBOX" and allows you to do do the following...
1) Read All ECU's codes (Work in progress).
2) Clear codes (Work in progress).
3) Read steering wheel position sensor data.
4) Read timing chain stretch and limits.
5) Reset timing chain learning data.
6) Force test AYC/ACD pump to run.
7) ACD bleeding.
8) AYC Left side bleeding.
9) AYC Right side bleeding.
10) ABS sensors live data reading (Work in progress).
11) ABS solenoids drive test. (Work in progress).
12) Heating and Air Con. Live data read (Work in progress).
13) Heating and Air Con. actuators test (Work in progress).


NOTE: The ACD/AYC functions do NOT require the engine running or the steering wheel to be turned to activate functions.
You can simply activate the test and do the bleeding.
The test will stop after 5 minutes but you must make sure you don't run out of oil in the rear tank !

As you can see from above list, some features are still work in progress.
This software is PC only and needs you to have a Tactrix cable or other equivalent "PASSTHRU" cable.
This will work on any version of windows that supports the type of "Passthru" cable you have.

At the moment, I am looking for people that are willing to try it and give me some feedback on its operation and maybe some suggestions for other features.
I have fully tested this on my own car but this tool simply emulates how a MUT3 factory tool would do the same things.

Requirements and use....
1) Will run on any PC running windows XP / 7 / 8 / 10.

2) You will need to have installed a Tactrix interface or other "PASSTHRU" equivalent device previously.
If you have already installed and used EcuFlash, EvoScan or ETACS Decoder then you have already done this.

3) Download the file using the link at the end of this post and copy to a new folder.
This program does not require any further installs of any libraries or rely upon any other frameworks.

4) Windows may complain this file is a security risk but it is perfectly safe to download.
You may virus scan it before you run it if you need to.
Most virus programs scan files before they run anyway.

5) This program does NOT collect any personal information at any time nor does it contain any adverts or payment requests.

6) The software is absolutely free to use but remains copyright of myself.

7) Please post on here how you get on with it.
Download link....


DOWNLOAD HERE V1.1




















Any suggestions/comments etc... feel free to ask me :)
 

·
Registered
Joined
·
450 Posts
Wow. This is awesome. I'm downloading now for future use.. I don't have a Tactrix yet. But I'll grab one and try this out.
 

·
Registered
Joined
·
450 Posts
When I try to install it, it says

"The code execution cannot proceed because op20pt32.dll was not found. Reinstalling the program may fix this problem."
 

·
Registered
Joined
·
60 Posts
HELL TO THE YES ILL TRY IT!!! Especially for a fellow coder I’ll definitely give it a try once I pick up my X Tuesday!
 

·
Registered
Joined
·
5 Posts
Discussion Starter #6
When I try to install it, it says

"The code execution cannot proceed because op20pt32.dll was not found. Reinstalling the program may fix this problem."

You haven't installed a Tactrix interface yet !
 

·
Registered
Joined
·
2 Posts
I just bleed my AYC System with this! For the most part, the software works as described, however, I somehow couldn't get it to activate unless I move it into C drive and it will have write error to C drive, but was able to activate the software for use. I tried a couple of different locations, the software just doesn't want to activate. The Tining Chin isn't working for me. Keep saying needs more drive and can't read anything.

I was running on Windows 10 in Parallel Desktop on top of Mac OS Big Sur, connected to OpenPort 2.0 and 08 GSR. Thank you for the software!!!
 

·
Registered
Joined
·
5 Posts
Thanks so much for putting the time into this!
Any update on the wheel sensors part? Ive been having issues with my ACD kickingout, and Im thinking it has to do with the wheel speed sesnors or bearings.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #12
Hey all,
Sorry I have been quiet but life sucks !


Anyway, I have updated the software so it no longer needs remote activation which has caused people issues in trying this out. Please download this latest version and try again if you had any issues.
This version still ONLY has AYC and TIMING CHAIN functions as it stands.
 

·
Registered
Joined
·
5 Posts
Hey all,
Sorry I have been quiet but life sucks !


Anyway, I have updated the software so it no longer needs remote activation which has caused people issues in trying this out. Please download this latest version and try again if you had any issues.
This version still ONLY has AYC and TIMING CHAIN functions as it stands.

No worries!
Life has a way of getting busy
My car is still in pieces!
 
1 - 14 of 14 Posts
Top