[EdmBimmer]

So I sold my AP and wanted to start to use my Tactrix 2.0.

All good up until I try to read my stock ECU (Unmarried the AP, had Stage 2).

[01:04:58.678] EcuFlash Version 1.42.2595
[01:04:58.678] OS Version Windows Vista
[01:04:58.678] Qt Version 4.5.0
[01:04:58.688] 56 memory models read.
[01:04:58.688] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash1/rommetadata
[01:04:59.108] 343 ROM metadata models scanned.
[01:04:59.108] checksum module "subarudbw" loaded.
[01:04:59.108] checksum module "mitsucan" loaded.
[01:04:59.108] flashing tool "wrx02" loaded.
[01:04:59.108] flashing tool "wrx04" loaded.
[01:04:59.108] flashing tool "sti04" loaded.
[01:04:59.108] flashing tool "sti05" loaded.
[01:04:59.108] flashing tool "mitsukernel" loaded.
[01:04:59.108] flashing tool "mitsukernelocp" loaded.
[01:04:59.108] flashing tool "mitsubootloader" loaded.
[01:04:59.108] flashing tool "shbootmode" loaded.
[01:04:59.108] flashing tool "shaudmode" loaded.
[01:04:59.108] flashing tool "subarucan" loaded.
[01:04:59.108] flashing tool "mitsucan" loaded.
[01:05:09.405] J2534 API Version: 04.04
[01:05:09.405] J2534 DLL Version: 0.50.2598 (DEBUG) Jun 26 2009 15:02:29
[01:05:09.405] Device Firmware Version: 1.07.2597
[01:05:11.557] sending init sequence 1 (0001)
[01:05:14.827] sending init sequence 1 (0003)
[01:05:18.088] sending init sequence 1 (FFFF)
[01:05:20.805] no response to any known code
[01:05:20.805] interface close

Any ideas? Sorry for the noob, I tried searching but found nothing that helped.

 

[nonschlont]

do u have the .xml needed for your rom?

http://goldenevo.com/

 

[EdmBimmer]

^
Thanks! Sorry, I just get confused with what I need to do?

 

[chetrickerman]

Did you get it?

 

[EdmBimmer]

Yea, I downloaded the ones for a 2010 USDM 5MT and placed it in the folder it told me to. I haven't connected to my car yet, but is that all I need to do?

I'm planning to use one of the modded roms for now that comes close to my mods but I hope to get a email tune from some of the pros on the board.

 

[gunzo]

Under read from ECU ..

which option did you select ?
Mitsubishi OR CAN ??

use CAN to read from your evo

 

[EdmBimmer]

Under read from ECU ..

which option did you select ?
Mitsubishi OR CAN ??

use CAN to read from your evo

Ok, will do. Trying it now.

 

[EdmBimmer]

Wow.

Same problems. Is it this hard to do this?

 

[chetrickerman]

Check your usb cable, check to see if ECUFlash actually recognizes your Openport cable.

 

[EdmBimmer]

Check your usb cable, check to see if ECUFlash actually recognizes your Openport cable.

Yea, at the bottm of EcuFlash is says OpenPort 2.0 on COM12.

I've searched through both forums and can't find anything that helps me.

 

[chetrickerman]

I got that same message when I tried to read off of a Ecu that was still married to an AP (customer didn't tell me, lol)

 

[EdmBimmer]

So I have Evoscan and it works fine. I can datalog so I know it connects to the ECU.

Is there a version of Ecuflash I need? I have Version 1.42.2595.

 

[EdmBimmer]

I got that same message when I tried to read off of a Ecu that was still married to an AP (customer didn't tell me, lol)

Thought that too. Connected the AP and it is unmarried to my car.

:wtfsign:

 

[chetrickerman]

You could try to uninstall EcuFlash, then reinstall it. Make sure you have the openport plugged in during the install.

If nothing else works, as long as the software and openport is installed properly, benching the Ecu should fix it all

 

[xPRimNT]

If you like, I can run you through the ropes in person this week. Should be around in the evenings.

Definitely choosing the right vehicle in the list?

 

[EdmBimmer]

You could try to uninstall EcuFlash, then reinstall it. Make sure you have the openport plugged in during the install.

If nothing else works, as long as the software and openport is installed properly, benching the Ecu should fix it all

Wow. Really. What a PITA. I'm staring at my AP wondering if it is worth all this work.

If you like, I can run you through the ropes in person this week. Should be around in the evenings.

Definitely choosing the right vehicle in the list?

That would be awesome. Speaking with Aura I was going to contact you anyway so see if you'd road tune my car. I'd pay of course!

Problem is I need to use my car tomorrow. With my mods and the stock map will I be ok?

 

[chetrickerman]

It is definitly worth it to get rid of the AP

 

[EdmBimmer]

It is definitly worth it to get rid of the AP

Ok, well I'll keep trying!

 

[EdmBimmer]

Problem solved. Read my Rom and saved it as a base file.

Now I guess I can tuning.

 

[chetrickerman]

what was the problem?