Mitsubishi Lancer Evolution Forum banner

Rear strut won't line the f*** up.

6194 Views 12 Replies 7 Participants Last post by  Vasaras
So I got the new spring on the rear strut except now when i put it back into place, the bottom of the strut won't line up. No idea what to do to make it work. Any ideas?
1 - 2 of 13 Posts
i just installed my springs last week. stick a screw driver on the bottom hole of the strut and turn it to match the place you wanna insert it to. i first secured the strut to the 2 bolts. not all the way just enough not to fall down. hope i helped..i used my hammer to gently put it back to place.
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.