[armysoldier1073]

This past weekend I installed a WL rear sway. I installed it while the rear was up in air off the ground. I tightened it all then let it down. Now I have a metallic pop sound when turning coming from the right rear. Can someone please tell me how to fix the pop sound? Thank you for your help.

 

[DaFastOne]

your bar might be hitting the top suspension arm.

 

[2011usmcEVO]

Agreed.. I just put on my Rear sway with the help of Andrew Tect MD

and there is no noise... but I would take it to a shop before something gets messed up

 

[Og Neon]

armysoldier, did you ever fix the problem? I started working on my rear tonight and quite because I couldn't get the old bolt to thread in with the old bracket. I am going to take your advice on the new brackets. Where did you get yours? Also I am working from my garage so space is limited. I may shoot you a message tomorrow looking for some help. Still trying to decide if i want to start the front with the car on jack stands.

 

[2011usmcEVO]

armysoldier, did you ever fix the problem? I started working on my rear tonight and quite because I couldn't get the old bolt to thread in with the old bracket. I am going to take your advice on the new brackets. Where did you get yours? Also I am working from my garage so space is limited. I may shoot you a message tomorrow looking for some help. Still trying to decide if i want to start the front with the car on jack stands.

Wait are you putting in a front sway bar?? I looked it up and it turned out to be a 5 hour job.. and with everything you got to drop.. id say its not worth it.. thats why im selling mines.. TOO MUCH WORK LOL

But if you do get it on.. your decently better than i am at suspension work than I am..

 

[armysoldier1073]

Nope I only did rear.... The bolts do go, takes some convincing.... Lol I tried the energy suspension 27mm bushing and universal bracket, it don't fit so I convinced stock to go back on. I put it on then lowered it then tightened all once wheels on ground.


Sent from my Autoguide iPhone app

 

[WraithX]

Does it have tabs welded on it?

 

[cbr1000]

I had the same problem, was a loose bolt. I'd go back through and make sure everything is tight..I'm guessing you have a loose bolt somewhere.

 

[WraithX]

Probably the top part of the endlinks.. I had a similar issue with my Whiteline Endlinks.