Mitsubishi Lancer Evolution Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6,195 Posts
AEM UEGO 30-4100

Is what you need.

Then you just plug the blue wire to a serial connector and the other to a chassis ground. Run a USB to serial converter cable to laptop and setup logging in ATR software.

How to set it up for logging is in the AEM Manual. You can get the parts online or radio shack.

Dynex DX-UBDB9 is the connector you want. It can use the Prolific drivers to use in Win 7.
 

·
Registered
Joined
·
6,195 Posts
I think contacting COBB would be best idea. Since they dictate what widebands you can use with the software. Plus the wifi version costs twice as much. All you need to make the UEGO plug and play is just a cig. lighter plug from Radio shack.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top