[McCoy]

Are you doing this with warm fluid?

What version of CFF are you using?

What order are you doing the teach in as that is critical?

 

[McCoy]

Hi Dan, yes I am doing it with the SST fluid warm up to at least 40 degrees Celsius as per the Technical Bulletin.
Upgraded my firmware to 8631B001.cff
The sequence for the Teach-In procedure is as follow:

No.1 -> No.2
Off Ignition
No.7 -> No.4 -> No.5 -> No.8

Also, I have left the firmware as it is after the Teach-In.

Yup, that's the correct sequence.

I'd suggest multiple tries with the car if you can, sometimes after a second consecutive teach in a car can go from not having a OK execution on one or two steps, to aceing every step. I've had similar results as you describe, but I believe this was due to fluid not being warm enough. A good 20 minute drive before the teach in seems to be the fix for me.

If you get continually stuck, send me a PM and I'll try to give you some help.

 

[McCoy]

And I got "Timeout error: YES" at all operations. Can anybody give an advice?

Targets are not being met. Re-read the service bulletin and try the process again, I'd say you are missing something very basic.

Goodluck.