The total is what you have logged. The base is what you have in the table.

So put 83.5 in your table at 2750 and 79.5 at 3000.

With that correction you probably have 94 or so in the table currently at 2750

 

so the correction number doesn't come into play at all?

so i just need to put the number that is in the WGDC_active column into the WGDC table?

 

my current 2750 is 71, that is why i am confused.

and my current 3000 is 76.5

 

Ok then go by what the difference is between your logged WGDC and your base (ROM).

You might be logging correction incorrectly.

 

i am more trying to understand than anything else.

 

what are you using to view the tables? OpenECU?

 

No it sounds like he is saying:

logged value - table value = correction

excuse my ignorance, but what does the correction number do for me?

should i just replace the table value with the logged value? or do i need to do something with the correction?

 

ok maybe i just understood it, tell me if i am right.

it is supposed to be table value-correction value=logged value?

i used ecuflash

 

pm sent

 

got it.

like i said in the PM, Golden has been teaching me over the last few months, and i am going to wait for his response before i flash anything to my ecu. But i am trying to learn as well so i thought i would ask here about WGDC and correction.

 

Ok. The issue here is that he has totally different tables in normal maps than his alt maps.

I think he is doing some pulls on the normal map and editing the alt maps.

I'll get it taken care of. I've just been really busy lately.

 

no worries golden, i knew you had to have been busy cause you usually get back to me fast, which is why i came here to find more knowledge.

i am 100% sure that i have only been running the alt map, and only adjusting the alt tables. Either way i am going to replace the WGDC table with what was on the logs.

 

Don't increase it in the lower rpm range.

 

0 0 0 0 0 21 26.5 62 62
0 0 0 0 0 21 26.5 62 62
0 0 0 0 0 21 26.5 62 62
0 0 0 0 0 21 26.5 63 63
0 0 0 0 6 21 26.5 66 66
0 0 0 0 9.5 21 26.5 87 87
0 0 0 0 14.5 21 26.5 83.5 83.5
0 0 0 0 14.5 21 26.5 79.5 79.5
0 0 0 0 14.5 21 26.5 78.5 78.5
0 0 0 10 14.5 21 26.5 78.5 78.5
0 0 0 10 14.5 21 30.5 80.5 80.5
0 0 0 10 14.5 24 34.5 84.5 84.5
0 0 0 10 20 30 40 87.5 87.5
0 0 0 17.5 25.5 35.5 44 94.5 94.5
0 0 0 25.5 32.5 41.5 49.5 96 96
0 0 0 34.5 40 48 56 97.5 97.5
0 0 0 42.5 47.5 54.5 62.5 97.5 97.5
0 0 0 50.5 54.5 60.5 68 97.5 97.5

here is what it looks like after the changed to match the log